Legris 3609 06 13 Brass Swivel Elbow Trap 6mm 1/4in
Nickel-plated brass swivel elbow connects 6 mm tube to 1/4 in BSPT thread, rated 435 psi at 302 °F
- Product typeDrain Components
- Swivel elbow enables flexible tubing routing in tight spaces
- Push-to-connect design secures 6 mm tube without tools
- Male BSPT 1/4 in thread connects directly to lubrication ports
- Brass construction withstands 435 psi and 302 °F operating limits
- Compact 21 mm length fits confined automotive installations
Lubrication Fitting for 6 mm Tubing
The Legris 3609 swivel elbow connects a 6 mm push-to-connect tube to a 1/4 inch male BSPT thread. It is built for lubrication circuits where a compact 90-degree turn is required. The nickel-plated brass body resists corrosion in workshop environments. New stock ships in original manufacturer packaging.
Brass Construction With Pre-Applied Sealant
The fitting body is machined from brass and finished in silver nickel plating. Male threads arrive with sealant already applied, so installation only needs hand tightening plus a spanner turn. The swivel nut allows the elbow to be oriented after the thread is seated without stressing the tubing. Overall length is 21 1/2 mm from end to end.
Pressure and Temperature Limits
Maximum operating pressure is rated at 435 psi and maximum temperature at 302 degrees F. Systems that exceed either value need a different fitting class. The push-to-connect side accepts only 6 mm outer-diameter tube; larger or smaller tubing will not seal. Buyers needing metric threads or a straight connector should select another model.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3609 06 13 |
| Product type | Drain Components |
Questions about this item
What thread standard does the 1/4 in MBSPT side use, and what pressure does it hold?
It uses a 1/4 in MBSPT thread and is rated for a maximum operating pressure of 435 psi.
What tube diameter and overall length does the push-fit side accept?
The push-fit side accepts a 6 mm tube outer diameter and the fitting has an overall length of 21 1/2 mm.
How is the swivel elbow installed, and what common step is missed?
Push the 6 mm tube firmly into the push-fit end until it seats, then thread the 1/4 in MBSPT end into the port; the step often missed is pushing the tube past the collet until it hits the internal stop.
More in Drain Stoppers, Strainers & Traps
Similar items
Valterra
Valterra 7101GR Gate Valve 1-1/2 in Slip ABS Class 125
- Drain Components
- HAWA
$11.99
0.00014632BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017073BTC
In stock
Legris
Legris 3604 04 00 Push-Fit Tee Fitting 5/32 in Brass
- Drain Components
- HAWA
$11.99
0.00014632BTC
In stock