Legris 3675 14 21 14mm Tube x BSPT Male Connector
Connects 14 mm tube to 1/2 in BSPT thread with nickel-plated brass rated to 435 psi and 302 °F
- Product typeDrain Components
- Nickel-plated brass resists corrosion for long service life
- 14 mm tube connects to 1/2 in BSPT male thread
- 435 psi rating handles high-pressure plumbing systems
- Operates from -4 °F to 302 °F across demanding environments
- 24 mm hex allows secure tightening with standard tools
Fitting Type and Connection
This Legris 3675 male connector joins a 14 mm tube to a BSPT threaded port. The nickel-plated brass body suits pneumatic and hydraulic circuits in automotive or industrial maintenance. Installers gain a straight, leak-tight joint without special tooling beyond a standard spanner.
Suitable Installations and Limits
The fitting handles pressures up to 435 psi and temperatures from -4 to 302 degrees F. It fits pipe sizes of 1/2 in and tube sizes of 9/16 in with a 24 mm hex. Systems requiring push-to-connect ends, female threads or larger bore diameters need a different component.
Deciding Specification
The critical value is the 435 psi maximum pressure rating combined with the BSPT male thread form. Verify that your circuit pressure stays below this limit and that the mating port uses the matching BSPT standard before ordering.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 3675 14 21 |
| Product type | Drain Components |
Questions about this item
What tube size and thread does the 3675 14 21 connector accept?
The connector fits a 9/16 in tube and a 1/2 in BSPT male thread, with a 24 mm hex for tightening.
How do I install this nickel-plated brass fitting without damaging the threads?
Hand-tighten the BSPT thread into the port, then use a 24 mm spanner for a final quarter-turn; over-tightening distorts the taper seal.
When should I replace the connector given its pressure and temperature limits?
Replace it if you see corrosion, deformation, or leaks after sustained use near the 435 psi or 302 °F limits.
More in Drain Stoppers, Strainers & Traps
Similar items
Valterra
Valterra 7101GR Gate Valve 1-1/2 in Slip ABS Class 125
- Drain Components
- HAWA
$11.99
0.00014611BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017048BTC
In stock
Legris
Legris 3604 04 00 Push-Fit Tee Fitting 5/32 in Brass
- Drain Components
- HAWA
$11.99
0.00014611BTC
In stock