We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass flow control regulator with 10mm push-to-connect inlet and BSPP outlet

Legris

Legris 7010 10 13 Flow Control Regulator 10mm

SKU CH-DGSC-JDM6N MPN 7010

Flow control regulator with 10 mm push-to-connect inlet and 1/4 in BSPP outlet, rated 14.5 to 145 psi and 158 °F max temperature

  • Product typeDrain Components
  • Main materialHAWA
  • Precise flow control with 360-degree rotation
  • Handles up to 145 psi working pressure
  • Operates reliably up to 158°F temperature
  • 10mm push-to-connect inlet for quick installation
  • 1/4 BSPP outlet ensures secure connection

Legris 7010 Flow Control Regulator

The Legris 7010 10 13 is a pneumatic flow control valve built for compressed-air circuits that need adjustable metering in one direction. It suits maintenance engineers and automation technicians who install push-to-connect tubing on machine actuators.

Interface and pressure limits

The valve accepts a 10 mm push-to-connect tube at the inlet and a 1/4 in BSPP thread at the outlet. It operates between 14.5 and 145 psi with a maximum temperature of 158 degrees F and allows 360 degrees rotation for alignment.

Installation checks

Verify that your supply pressure stays within the 14.5 to 145 psi range and that the media temperature will not exceed 158 degrees F. Confirm the 10 mm tube OD and 1/4 in BSPP port match your existing fittings before ordering.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 67% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name7010 10 13
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

Which tube size and model code match the 10 mm push-to-connect inlet on this Legris flow control regulator?

The regulator is model 7010 10 13 and accepts a 10 mm tube on the inlet side with a 1/4 in BSPP outlet thread.

What does the 145 psi maximum pressure rating mean when the valve is installed in a pneumatic circuit?

It sets the highest safe operating pressure; the adjustable range runs from 14.5 psi up to 145 psi so flow can be metered anywhere in that window.

How does the 1/4 in BSPP outlet port limit the fittings I can use with this regulator?

Only 1/4 in BSPP male threads will seal correctly on the outlet; the inlet uses a 10 mm push-to-connect fitting instead.

More in Drain Stoppers, Strainers & Traps

Similar items