We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass flow control valve with 6mm push-to-connect inlet and M5 threaded outlet

Legris

Legris 7660 06 19 Flow Control Trap 6mm OD

SKU CH-H0TJ-HKSDF MPN 7660

A flow-control regulator with 6 mm push-to-connect inlet, M5 × 0.8 outlet, 14.5–145 psi range, 158 °F max temperature and 360° rotation

  • Product typeDrain Components
  • Precise flow regulation with 14.5 to 145 psi pressure range
  • Secure 6mm push-to-connect inlet for quick installation
  • M5 x 0.8 outlet port fits standard pneumatic fittings
  • Withstands 158°F maximum temperature for demanding environments
  • Full 360° rotation allows flexible positioning in tight spaces

Compact Pneumatic Flow Regulator

The Legris 7660 06 19 is a push-to-connect flow control valve built for 6 mm OD tubing. It suits automation engineers and maintenance technicians who need precise, in-line speed adjustment on single-acting pneumatic cylinders or actuators.

Consistent Metering Across Pressure Band

The valve regulates flow from 14.5 up to 145 psi while withstanding temperatures to 158 Degrees F. Its 360-degree rotation allows fine, repeatable metering during continuous cycling rather than only at start-up.

Verify Port Thread And Tubing Match

Confirm the M5 x 0.8 outlet thread matches your existing port and that system pressure stays within the 145 psi limit. The 6 mm push-to-connect inlet requires compatible metric tubing for a leak-free seal.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 63% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameLegris
Model name7660 06 19
Product typeDrain Components

Questions about this item

How much heat can the 7660 06 19 regulator handle during continuous pneumatic use?

The valve is rated for a maximum temperature of 158 degrees F, so it will operate within spec during all-day pneumatic cycles.

Which fittings and tubing must I already have to install this 6 mm push-to-connect valve?

You need 6 mm OD push-to-connect tubing for the inlet and an M5 x 0.8 threaded port for the outlet connection.

Will the 14.5 to 145 psi adjustment range work with my older low-pressure air preparation unit?

Yes, the regulator covers 14.5 to 145 psi, so it is compatible with legacy systems that operate anywhere inside that pressure window.

More in Drain Stoppers, Strainers & Traps

Similar items