Legris 7770 06 00 Flow Control Valve 6mm 145 psi
A flow control valve with 6 mm push-to-connect ports, 145 psi maximum pressure and 360-degree screwdriver adjustment
- Product typeDrain Components
- Main materialHAWA
- Precise flow adjustment via screwdriver control
- 6 mm push-to-connect ports for quick tubing fit
- Operates reliably up to 145 psi maximum pressure
- Functions from 14.5 to 145 psi working range
- Withstands temperatures up to 158 °F
Flow Control Valve 6 mm 145 psi
This Legris 7770 06 00 valve regulates pneumatic flow with screwdriver adjustment. It suits technicians setting actuator speed on compressed-air circuits. The push-to-connect ports accept 6 mm tubing on both inlet and outlet. Maximum working pressure is 145 psi and temperature limit is 158 °F.
Check Port Size and Pressure Range
Verify that your airline uses 6 mm push-to-connect fittings before ordering. The valve operates between 14.5 psi and 145 psi, so system pressure must stay inside this window. Confirm the medium is clean, dry compressed air compatible with HAWA material. The valve body rotates 360 degrees for alignment, but panel mounting dimensions are not supplied.
Thermals Noise and Power Draw
No electrical power is consumed because actuation is purely pneumatic. The valve generates no audible noise beyond normal air exhaust from downstream components. Surface temperature follows the supply air up to the 158 °F rating. There are no fans, heaters or electronic circuits to contribute heat or sound.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $46.99
- Pricier than about 61% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Legris |
| Model name | 7770 06 00 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
Does the Legris 7770 06 00 valve include tubing or fittings, or must they be purchased separately?
The valve has 6 mm push-to-connect ports on both inlet and outlet; tubing and any additional fittings are not included and must be sourced separately.
How do I choose between the available pressure-range options for this model?
This specific model operates from 14.5 psi up to 145 psi, so select it when your system pressure falls inside that range.
What does the 145 psi maximum pressure rating mean when the valve is installed in a pneumatic circuit?
It is the highest gauge pressure the valve can safely handle at up to 158 °F; system pressure must stay at or below 145 psi during operation.
More in Drain Stoppers, Strainers & Traps
Similar items
Viega 79050 1-1/4" Press Bronze Spring Check Valve
- Drain Components
- HAWA
HAYWARD POOL PRODUCTS INC BFAS1015TFS 1-1/2" Bulkhead Fitting FNPT x FNPT trap
- Drain Components
- HAWA





