Lenkeng Technology Co,. Ltd LKV712Pro HDMI Extender Splitter 1080P 40m
Extends one HDMI source to two displays over CAT6 cable up to 40m at 1080p@60Hz with loop-out, IR passback and EDID management
- Supported distance130 ft (39.6 m)
- Supported resolutions1080P
- Product colorBlack
- Split one source to two displays over CAT6 cable
- Transmit 1080p video up to 40 metres at 60 Hz
- Loop-out port enables local monitoring at the transmitter
- EDID management auto-negotiates the best supported resolution
- IR pass-back lets you control the source from the remote location
1x2 HDMI Extender Splitter
The Lenkeng LKV712Pro sends one HDMI source to two displays over a single CAT6, CAT6A, CAT7 or CAT8 cable. It reaches up to 40 metres at 1080p 60 Hz and includes a local HDMI loop-out for monitoring. The kit contains a transmitter, two receivers, IR cables and one power supply.
PoE Simplifies Installation
Only the transmitter needs mains power; the receivers draw power over the same category cable. Wall-mount brackets allow tidy placement in conference rooms, exhibition stands or show centres. IR pass-back at 20 to 60 Hz lets you control the source from the remote display location.
Upgrade From Direct HDMI Runs
This unit replaces short copper HDMI leads when the source and screens are farther apart than a passive cable allows. The jump is worth it when you need simultaneous dual-display distribution with IR control and EDID management over one affordable cable run.
How it compares
Measured against everything we stock in A/V Extenders & USB Hubs, at today’s prices. Recalculated every night.
- Price $154.99
- Pricier than about 55% of the 239 comparable items (median $132.99).
Specifications
| Product | |
|---|---|
| Product color | Black |
| Performance | |
| Supported distance | 130 ft (39.6 m) |
| Display | |
| Supported resolutions | 1080P |
Questions about this item
What resolution and refresh rate does the HDMI extender support over the CAT6 cable?
The extender transmits 1080p at 60 Hz up to 40 m over CAT6, 6a or 7 cable.
How many CAT6 cables and power adapters are required to connect both displays?
One CAT6 run per receiver and a single power adapter at the transmitter; the receivers draw power over the same cable.
What is the correct order for connecting the IR cables so the source responds to the remote?
Plug the IR receiver cable into the receiver unit and the IR blaster cable into the transmitter before powering on.
More in A/V Extenders & USB Hubs
Similar items
Cables To Go C2G60220 4K 60Hz HDMI over Cat5/Cat6 Extender Kit 164
MCHOSE Pro A/V Extender & Repeater 8-in-1 USB 3.0 Hub with 3.5 mm Audio Jack
- USB Hubs
Lenkeng Technology Co,. Ltd LKV683-4.0 4Kx2K@30Hz HDMI 1.4 Extender 120m CAT5e/6 Splitter with IR Remote
Vszerda HDMI Extender Splitter 1x4 1080P@60Hz 50m CAT6 POC
- HDMI
- 1 × 4





