Lenovo 39Y8938 Front End 30A PDU 120V 3x C19
Distributes 120 V AC power at 30 A through three IEC 60320 C19 outlets from a single NEMA L5-30P input
- Delivers 2880 VA capacity for dense server racks
- NEMA L5-30P input feeds three IEC 60320 C19 outlets
- Compact 1.6" height fits tight 1U spaces
- 60 lb lightweight design eases rack installation
- 120 V AC input and output matches standard North American power
Lenovo Front End 30A PDU 120V
The Lenovo 39Y8938 is a 120 V front-end power distribution unit rated for 30 A and 2880 VA. It accepts a single NEMA L5-30P plug and provides three IEC 60320 C19 outlets for rack-mounted equipment. The compact chassis measures 1.6 in high, 8.8 in wide and 8.9 in deep and weighs approximately 16.60 lb. It is designed for xSeries server environments that need efficient power distribution without country-specific hardwired cords.
Suits 120 V racks with three C19 loads
This unit suits administrators who need to distribute a 30 A 120 V supply to three C19 inlets in a dense rack. It is not for installations that require a different input voltage, more than three C19 receptacles, or integrated metering and switching functions. Buyers needing higher outlet counts or remote monitoring should look at other PDU models.
Single NEMA L5-30P input, three C19 outputs
The defining specification is the combination of one NEMA L5-30P inlet and three IEC 60320 C19 outlets at 120 V. If your rack power uses that exact plug and outlet arrangement, this PDU matches; otherwise a different input connector or outlet count is required.
How it compares
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
- Price $511.99
- Typical for this category: the median of 643 items is $451.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Lenovo |
Questions about this item
Which inlet plug must my facility provide so the 39Y8938 can connect to a 120 V supply?
The unit requires a single NEMA L5-30P receptacle rated for 30 A at 120 V AC.
Can I keep using my existing IEC 60320 C19 power cords with the three outlets on this PDU?
Yes, each of the three outlets is an IEC 60320 C19 socket, so standard C19 cords will fit directly.
After wiring the PDU, what indicates the 2880 VA-rated unit is delivering power to the connected servers?
The attached equipment will power on normally; the PDU itself has no status LEDs, so server startup confirms operation.
More in Rackmount PDUs
Similar items
Tripp Lite PDUMV30HV PDU 30A 208/240V 30 Outlets 6C19 24C13 L6-30P 10ft 0U Vertical
- 0U
- Tested to UL60950-1…
CyberPower CPS1215RM 120V 15A Basic PDU 10 Outlets 15ft NEMA 5-15P 1U
- 1U
- 1U
Tripp Lite PDUMV20 Metered PDU 20A 28 Outlets 120V 15ft 0U Vertical
- 0U
- 120 V





