Lift-all 6A108 Tiedown Cam Strap Assembly 330 lb Endless 15 ft

Lift-All 6A108 Cam Buckle Strap

The Lift-All 6A108 is a polyester tie-down strap built for securing light loads during transport. Its endless loop design removes fixed ends so the strap feeds through the cam buckle for a snug fit. The assembly meets CVSA, FMCSA and US DOT standards for cargo securement. It suits drivers and handlers who need a simple, compliant restraint for everyday hauling.

Working Load Limit and Buckle Operation

The strap carries a working load limit of 330 lb, which is the maximum force it should sustain in normal use. Tensile strength reaches 2,100 lb per inch of width before the material fails. The cam buckle tightens by hand and holds through friction, so tension depends on the operator’s pull rather than a ratchet mechanism. Over-tensioning or shock loading can exceed the stated limit without warning.

Endless Loop Configuration

Because the strap forms a continuous 15 ft loop with no hooks or fixed ends, it must wrap completely around the load or anchor points. This makes it unsuitable for situations where a single-end attachment is required or where hardware cannot be threaded through the loop. Buyers needing a strap with fixed end fittings or a longer fixed-end section should select a different configuration.