LINE-MASTER 632-S SPDT Momentary Foot Switch 125/250V AC 20A
A momentary foot switch with SPDT contacts rated for 20 A at 125/250 V AC in a cast-iron housing
- Color familyBlack
- Product typeIndustrial Electrical Controls & Automation
- Hands-free control with SPDT momentary switching
- Reliable 20 A rating at 125/250 V AC
- Durable cast-iron housing rated IP20
- Certified to CE, CSA, RoHS and UL standards
- Secure mounting via two integrated holes
Industrial Momentary Foot Switch
The LINE-MASTER 632-S is a heavy-duty SPDT momentary switch rated for 125/250V AC at 20A. Its cast-iron housing and NEMA 1 enclosure suit industrial control panels, machine tools, and automation tasks where hands-free actuation is required.
Simple Screw Mounting
Two pre-drilled mounting holes allow direct fastening to a flat surface or pedal board without special brackets. The momentary action returns automatically when released, so wiring must accommodate a normally-open/normally-closed SPDT circuit; incorrect polarity or over-tightened terminals are the common installation errors.
20 Amp Contact Limit
The switch carries a maximum of 20A at the rated voltage, so loads exceeding this value need an external contactor or relay. IP20 ingress protection means the unit is not sealed against dust or water, restricting use to dry indoor environments. CE, CSA, RoHS, and UL listings confirm compliance with basic safety standards.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $46.99
- Pricier than about 55% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | LINEMASTER |
| Product type | Industrial Electrical Controls & Automation |
| Color family | Black |
Questions about this item
How can I verify the LINE-MASTER 632-S is operating correctly after wiring it?
Press the pedal and confirm the connected load activates only while the pedal is held; release the pedal and the load should stop immediately, matching the momentary SPDT action rated for 20 A at 125/250 V AC.
What comes with the foot switch and what must I purchase separately?
The unit includes the cast-iron housing with two mounting holes; you must supply your own power cord, wire connectors and any conduit or strain-relief fittings required by your installation.
Which version of the 632-S should I choose for a 20 A circuit at 250 V AC?
The single model listed carries a 20 A, 125/250 V AC rating with SPDT momentary action, NEMA 1 and IP20 protection, and UL, CSA, CE and RoHS markings, so it covers that requirement directly.
More in Electrical Switches & Dimmers
Similar items
Leviton Manufacturing Co. 052-10097-008 pull chain switch
SIEMENS 52SA2BAB selector switch 30mm 3 position lever
- Black
- Light Switch
Schneider Electric XB5AVG6 22mm blue LED pilot light
- Blue
- Industrial Electric…





