We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White bio-based nylon push-fit elbow fitting, 3/8 to 1/2 inch tube ends

Liquifit

Liquifit 6302 60 62WP2 Push-Fit Elbow Fitting 3/8 in x 1/2 in

SKU CH-A68P-C5FYQ

Push-fit elbow joins 3/8 in and 1/2 in tubing, rated to 230 psi and 200 Degrees F in bio-based nylon

  • Push-to-connect ends speed installation
  • 3/8 in and 1/2 in tube sizes join different lines
  • Bio-based nylon body resists corrosion
  • 230 psi rating handles demanding pressure
  • 200 Degrees F limit suits hot-fluid systems

Push-Fit Elbow for Vacuum Lines

This Liquifit 6302 push-fit elbow connects 3/8 inch and 1/2 inch tubing in vacuum applications. The bio-based nylon body uses push-to-connect ends on both sides so no tools are required for installation. It is supplied new and rated for pressures up to 230 psi at temperatures up to 200 degrees F.

White Bio-Based Nylon with No Sealant

The fitting moulded in white bio-based nylon contains no pre-applied thread sealant, so the installer must add their own sealing method if the port requires it. California Proposition 65 notices state the product contains chemicals known to cause cancer and birth defects or other reproductive harm. The overall length measures 1 27/32 inches.

Pressure and Temperature Limits

Maximum operating pressure is 230 psi and maximum operating temperature is 200 degrees F, which bounds the vacuum and low-pressure systems this elbow can serve. The push-to-connect design relies on tube stiffness and accurate outer diameters, so soft or undersized tubing may not seal reliably. Buyers needing threaded ports or higher temperature ratings must select a different fitting style.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 55% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameLIQUIFIT

Questions about this item

Will the bio-based nylon fitting need periodic replacement due to material fatigue?

The bio-based nylon construction is rated for continuous service up to 200 Degrees F and 230 psi, with no scheduled replacement interval specified.

What pressure limit will be reached first during sustained high-pressure use?

The maximum operating pressure is 230 psi, which is the primary limit before the push-to-connect seals could be compromised.

How much heat does the fitting generate when fluid runs through it all day?

The fitting itself generates no heat; it is rated to withstand fluid temperatures up to 200 Degrees F without degradation.

More in Hose Fittings, Adapters & Clamps

Similar items