We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey braided DisplayPort to HDMI cable, 10ft, aluminium ends

LKEENR DisplayPort 1.4 to HDMI 2.1 Cable 10ft 8K@60Hz Braided

SKU CH-RV33-TX3ZA

Connects a DisplayPort 1.4 source to an HDMI 2.1 display at 8K 60 Hz, 4K 120 Hz or 1440p 165 Hz with 32.4 Gbps bandwidth, HDR and eARC over a 10 ft braided cable

  • Rated speed32,400 Mbit/s
  • Cable length10
  • Connector count20
  • Product typeHDMI
  • Product colorGrey
  • Overall length10
  • 8K@60Hz resolution delivers ultra-sharp detail for creative work and gaming
  • 4Gbps bandwidth handles high-refresh 4K@144Hz and 2K@165Hz without lag
  • Braided nylon jacket with aluminium housing resists wear and protects connectors
  • 28AWG copper core and multi-layer shielding prevent signal loss and screen tearing
  • HDCP 2.3 and Dynamic HDR support ensure protected 8K content plays correctly

DP 1.4 to HDMI 2.1 cable for 8K displays

This ten-foot LKEENR cable connects a DisplayPort 1.4 source to an HDMI 2.1 display. It targets gamers and professionals who need 8K at 60 Hz or 4K at 120 Hz from a graphics card or laptop. The braided jacket and aluminium housings add durability for permanent desk runs or frequent plugging.

Bandwidth ceiling and directional limit

The link runs at 32.4 Gbps using HBR3 signalling and DSC 1.2 compression. That bandwidth caps 8K at 60 Hz and 4K at 144 Hz; higher refresh rates at 8K are not possible. The cable is uni-directional, so the DisplayPort plug must go to the source and the HDMI plug to the monitor — reversing them will not work.

Check source port and display capabilities

Verify your GPU or laptop has a DisplayPort 1.4 output with HBR3 and DSC support; older DP 1.2 ports cannot deliver the stated resolutions. Confirm the monitor accepts 8K or high-refresh 4K over its HDMI 2.1 input and that HDCP 2.3 is enabled for protected content. The ten-foot length suits typical desk distances; longer runs may need an active extender.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $34.99
Pricier than about 90% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameLKEENR
Product typeHDMI
Product colorGrey
Performance
Rated speed32,400 Mbit/s
Ports & slots
Connector count20
Size & build
Cable length10

Questions about this item

Should I pick the 10ft length or a shorter one for my setup?

Choose 10ft when the GPU and display are far apart — for example across a living room or behind a desk — and pick 3.3ft, 5ft or 6.6ft for shorter runs to avoid excess cable.

What does 32.4Gbps actually deliver on my monitor?

It carries 8K at 60Hz, 4K up to 144Hz, 2K up to 165Hz and 1080p up to 165Hz with Dynamic HDR and DSC 1.2, provided your GPU and display support those modes.

Does the DisplayPort 1.4 to HDMI 2.1 link limit the refresh rate I see?

The cable is rated for 32.4Gbps HBR3, so the practical ceiling is set by your source and sink — up to 8K60, 4K144 or 2K165 — not by the cable itself.

More in USB Cords & Extension Cables

Similar items