Loc-Line 41481 Swivel Nozzle Trap 54° 110 psi 170°F .04 in Pk2
Two swivel nozzles direct flow up to 54° at 110 psi and 170 °F through a .04 in hole
- Product typeDrain Components
- Swivel action directs flow up to 54 degrees
- Rated for 110 psi maximum working pressure
- Withstands temperatures up to 170 degrees Fahrenheit
- Compatible with oils solvents and detergents
- Two-piece pack supplies spare or dual setup
Swivel Nozzle 54° 110 psi
The Loc-Line 41481 swivel nozzle delivers a 54 degree swing angle and a 110 psi pressure rating for precise fluid direction. It operates at temperatures up to 170 degrees Fahrenheit. The .04 inch hole diameter provides a fine, controlled stream. This two-pack suits maintenance and light industrial tasks.
Capacity and headroom
The nozzle handles pressures up to 110 psi and temperatures up to 170 degrees Fahrenheit. It resists acetone, alcohol, gasoline, oils, sodium hydroxide and common solvents. The 54 degree swing angle covers most positioning needs. It runs out when higher pressure, wider articulation or threaded mounting are required.
Upgrade path
This replaces fixed or lower-rated nozzles that leak or lack articulation at 110 psi. The jump is worth it when a non-threaded quarter-inch connection fits and chemical compatibility matches the listed lubricants. It is not for systems needing threaded connections, higher pressure ratings or wider swing angles.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Loc-Line |
| Model name | 41481 |
| Product type | Drain Components |
Questions about this item
Will the 54° swivel nozzle clear my existing 1/4 in non-threaded hose?
Yes, the nozzle fits a 1/4 in non-threaded connection so it slides onto the hose you already use.
How can I confirm the 110 psi rating is holding after installation?
Pressurise the line to working pressure and watch for leaks at the swivel joint; no weeping means the seal is intact.
Does the pack of two include any clamps or adapters?
The package contains only the two swivel nozzles; clamps or adapters for the 1/4 in connection must be sourced separately.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc. 611RR 1/4x1/8x1/4 Copper Reducing Tee
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Loc-Line 45401 Acid Resistant Flex Hose Segments PK2
- Drain Components





