Loc-Line 51804 3/8 In NPT Connector Pack of 4
Four 3/8 inch NPT male connectors rated to 60 psi for building flexible coolant or fluid lines
- Product typeDrain Components
- Withstands up to 60 psi operating pressure
- Connects directly to 3/8 inch NPT male threads
- Resists acetone, alcohol, gasoline and common solvents
- Pack of four connectors for multiple installations
- Loc-Line brand trusted for modular hose systems
Connector pack for 3/8 NPT systems
This Loc-Line 51804 pack contains four connectors designed for 3/8 inch NPT male threads. Each unit transitions from a non-threaded 1/2 inch diameter end to the threaded connection. The components suit plumbing and fluid-transfer tasks that require this specific thread interface.
Pressure and chemical limits
The maximum working pressure is 60 psi. The material resists a listed range of lubricants and chemicals including acetone, alcohol, dish detergents, ethyl, gasoline, grease, lacquer solvents, oils and sodium hydroxide. Compatibility with substances outside this list is not confirmed by the manufacturer.
Simple threaded installation
Installation involves threading the 3/8 inch NPT male end into a matching female port. The non-threaded 1/2 inch end accepts a push-fit or clamped hose. Leaks usually come from insufficient thread sealant or overtightening; the pack provides four units so a damaged piece can be swapped quickly.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 95% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Loc-Line |
| Model name | 51804 |
| Product type | Drain Components |
Questions about this item
Should I buy the pack of four or look for a single 3/8 NPT connector?
The pack of four gives you spare connectors for multiple drain points or future repairs without reordering.
What does the 60 psi maximum pressure rating mean for my plumbing system?
It limits use to low-pressure drain, vent or coolant return lines; do not install on pressurised supply or hydraulic circuits.
How does the 3/8 inch NPT male thread affect compatibility?
It mates with standard 3/8 inch NPT female ports; taper threads seal with tape or paste and cannot join metric or BSP fittings.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc. U6072I 3/4" FTG x Cup 90° Intermediate Radius Elbow
- Drain Components
- HAWA
Nomaco Kflex 801-T-048138 1-3/8" x 37/64" Elastomeric Tee Trap
- Drain Components
- Black





