We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular OLED module with yellow and blue pixels on white PCB

LORDWORLD

LORDWORLD 0.96 Inch OLED Display Module Yellow & Blue Color (White)

SKU CH-T5PE-TQYEJ

A 0.96 inch OLED module with 28×64 resolution, SPI and I2C interfaces, and onboard voltage translation for Raspberry Pi, Arduino and STM32 projects

  • Ultra-narrow bezel gives a compact 0.96 inch display area
  • 28×64 pixel OLED shows yellow and blue colours
  • Dual SPI and I2C interfaces simplify wiring for many boards
  • Onboard voltage translator eases connection to different logic levels
  • Online examples for Raspberry Pi, Arduino and STM32 speed up development

Compact OLED Module

The LORDWORLD 0.96 inch OLED display module is a compact screen with an ultra-narrow bezel designed for maker projects. It features a yellow and blue colour scheme on a white PCB and includes an onboard voltage translator. The module connects via 4-wire SPI or I2C interfaces for broad microcontroller compatibility.

Makers Needing Small Visual Output

This module suits developers adding status readouts, sensor data or simple menus to Raspberry Pi, Arduino or STM32 builds. Online example code is provided for those platforms. Builders who require a larger viewing area, higher resolution graphics or touch input should consider other display options.

Dual SPI and I2C Interface

The single specification that decides fit is the combined 4-wire SPI and I2C communication support on one board. This dual interface lets you choose the faster SPI path or the two-wire I2C bus depending on available GPIO pins and project wiring constraints.

How it compares

Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.

Price $30.99
Cheaper than about 70% of the 1,420 comparable items (median $44.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLORDWORLD

Questions about this item

Which development board header do I connect the 28×64 OLED module to for SPI or I2C communication?

Wire the module to the 28-pin header on a Raspberry Pi 4B, 3B+, 3B, 2B+, Zero W, WH or 2W, or to the matching GPIO header on an Arduino or STM32 board.

Will the onboard voltage translator let me drive the display from 5 V logic on older Arduino boards?

Yes, the built-in voltage translator shifts 5 V signals down to the panel's logic level so older 5 V Arduino boards can communicate without extra level-shifting hardware.

How do I confirm the yellow and blue pixel areas are active after uploading a test sketch?

Run the supplied example code for your platform; the screen should show yellow pixels in the upper rows and blue pixels in the lower rows, proving the driver and colour zones are working.

More in Single-Board Computers & Dev Kits

Similar items