LORDWORLD 1200W Server PSU Breakout Board Adapter 17 Ports ATX 6 Pin
Breakout board converts 1200W server PSUs to 17 ATX 6-pin outputs for mining rigs
- 17 ATX ports power multiple GPUs for mining rigs
- Ounce copper PCB with solid capacitors ensures stable delivery
- Compatible with 800 W and 1200 W server PSU models
- Supports DPS-800GB, DPS-1200FB and DPS-1200QB units
- Works with PS-2751 and HSTSN-PL12 power supplies
Mining Power Distribution
This breakout board adapts compatible server PSUs for cryptocurrency mining rigs. It provides seventeen ATX 6-pin outputs from a single high-wattage unit. The board uses ounce copper PCB construction with solid capacitor filtering. It targets miners building multi-GPU systems on server power supplies.
Replaces Custom Wiring Harnesses
The adapter eliminates the need for hand-soldered breakout cables or multiple smaller PSUs. It is worth the switch when scaling beyond a few graphics cards on consumer power supplies. Supported models include DPS-800GB, DPS-1200FB, DPS-1200QB, PS-2751-5Q, PS-2751-LF-1F, HSTSN-PL12, DPS-700LB, PS-2112-5L and DPS-750RB units. The board consolidates power delivery into one tested PCB.
Seventeen 6-Pin Outputs
The board delivers up to seventeen discrete 6-pin connectors for GPU power. It comfortably handles large mining arrays drawing from 1200W server units. Headroom decreases when populating all ports with high-draw cards on lower-rated supplies like 700W or 750W models. Builders needing more than seventeen connectors or different pinouts must add external splitters or choose another distribution method.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $41.99
- Pricier than about 73% of the 5,998 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | LORDWORLD |
Questions about this item
What spacing do the 17 ATX 6-pin headers use on the board?
The 17 ATX 6-pin headers follow the standard 2 x 3 pin pitch used by server PSU breakout boards, matching the DPS-800GB, DPS-1200FB and DPS-1200QB mounting pattern.
How do I connect the adapter to a DPS-1200FB unit without shorting the sense pins?
Align the board edge connector with the PSU main output, seat it evenly, then attach the 17 ATX 6-pin cables; the common mistake is powering on before all 17 connectors are fully latched.
When should I replace the solid capacitors on this breakout board?
Inspect the solid capacitors after extended 1200 W mining loads; replace any that show bulging or leakage to maintain stable filtering for the 17 ATX outputs.
More in Tech Gadgets & Accessories
Similar items
DigitNow!
DigitNow! M125 5MP Film Scanner 35mm Slides 1800DPI 2.4in LCD
- Small
- Black
$41.99
0.0005126BTC
In stock
