We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular LCD screen with resistive touch layer and microSD slot on a green circuit board

LORDWORLD

LORDWORLD 2.8inch Touch Display 320×240 for Raspberry Pi Pico development board

SKU CH-BND0-CRFRY

A 2.8-inch IPS touch screen with 320×240 resolution and 262K colours connects to Raspberry Pi Pico via SPI using an ST7789 driver and XPT2046 controller, and includes a MicroSD slot for image storage

  • 8 inch IPS screen shows 320×240 resolution with 262K colors for clear visuals
  • Dedicated XPT2046 touch controller delivers smoother input than AD-controlled alternatives
  • MicroSD card slot stores images for direct on-screen display without extra hardware
  • Programmable backlight control reduces power draw during battery operation
  • Includes C/C++ and MicroPython examples for faster Raspberry Pi Pico development

Compact display for Pico projects

This 2.8 inch touch display is built for the Raspberry Pi Pico development board and connects through the SPI bus. It shows a 320×240 resolution on an IPS panel with 262K colours. A dedicated XPT2046 resistive touch controller provides smoother input than ADC-only solutions, and the ST7789 driver handles the screen.

Makers adding a small GUI

The module suits hobbyists and engineers who need a colour touchscreen for Pico-based prototypes, data logging or simple interfaces. Projects that require capacitive multi-touch, higher pixel density or a larger viewing area will not be satisfied by this resistive 2.8 inch panel.

Ready-to-run code and storage

A MicroSD card slot lets you store images and display them directly without extra hardware. Programmable backlight control helps reduce power draw in battery-powered builds. The package includes development resources and a manual with C/C++ and MicroPython examples so you can start writing code immediately.

How it compares

Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.

Price $45.99
Typical for this category: the median of 1,420 items is $44.99.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLORDWORLD

Questions about this item

Do I need a Raspberry Pi Pico board to use this 2.8 inch display?

Yes, the module is designed to plug directly into a Raspberry Pi Pico mini board and communicates over the SPI bus.

Can I keep using the Pico's GPIO pins for other sensors while this display is attached?

The display uses the SPI bus and touch controller XPT2046, so any pins not occupied by that interface remain free for additional hardware.

How can I verify the ST7789 driver and XPT2046 touch controller are working after wiring it up?

Run the supplied C/C++ or MicroPython examples; they initialise the 320×240 IPS panel, show 262K-colour graphics and respond to resistive touch input.

More in Single-Board Computers & Dev Kits

Similar items