We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
4.3 inch IPS LCD touchscreen with protective case for Raspberry Pi 4B

LORDWORLD

LORDWORLD 4.3inch DSI LCD Capacitive Touch Display 800×480 IPS with Protection Case for Raspberry Pi 4B

SKU CH-2MVS-4FXHF

4.3 inch capacitive touch display for Raspberry Pi 4B with 800×480 IPS panel and protective case

  • Crisp visuals from 800×480 IPS panel
  • Smooth motion at up to 60 Hz refresh
  • Responsive control with 5-point capacitive touch
  • Ready for Raspberry Pi 4B via MIPI DSI
  • Works with Raspbian, Ubuntu, Kali and Windows 10 IoT driver-free

4.3-inch DSI touch display for Pi 4B

This 4.3-inch IPS screen connects through the MIPI DSI port on a Raspberry Pi 4B and shows 800×480 pixels at up to 60 Hz. The capacitive panel recognises up to 10 simultaneous touch points for direct on-screen control. It runs on Raspbian, Ubuntu, Kali and Windows 10 IoT without extra driver installation. The bundle includes a fitted protection case that encloses the board and display together.

Thermals noise and power in use

The panel draws its power from the Pi's DSI connector so no separate supply or cable is required. With no backlight inverter or active cooling the unit adds negligible heat and produces no audible noise during normal operation. Typical current draw stays well within the Pi's onboard 5 V rail limits leaving headroom for other peripherals. The IPS layer maintains consistent colour and contrast across wide viewing angles without extra power cost.

Build connectors and daily handling

The supplied case snaps around the display and Pi 4B creating a single rugged module that resists knocks and dust on a bench or in a kiosk. All Pi ports remain accessible through cut-outs so Ethernet, USB and GPIO stay usable while the screen is mounted. The DSI ribbon routes internally removing strain on the delicate flex cable during transport. Capacitive glass surface resists scratches better than resistive films and wipes clean with a dry cloth.

How it compares

Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.

Price $83.99
Pricier than about 78% of the 1,420 comparable items (median $44.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLORDWORLD

Questions about this item

How do I connect the MIPI DSI ribbon to the Raspberry Pi 4B without bending the flex cable?

Align the ribbon contacts with the Pi DSI connector, lift the latch, insert straight, then lock the latch; the 4.3 inch display draws power and data through this single link.

What part will need replacement first if the touch layer loses accuracy after heavy use?

The capacitive touch panel supports 5-point touch and is bonded to the IPS glass; loss of accuracy means replacing the entire display module.

At what refresh ceiling does the panel stop updating smoothly during continuous animation?

The MIPI DSI interface runs up to 60 Hz, so sustained motion above that rate will drop frames on the 800×480 IPS screen.

More in Single-Board Computers & Dev Kits

Similar items