LORDWORLD 4pcs DIY Power Extension Cable Set 10cm USB 2.0 DC 5.5x2.1mm 3.5x1.35mm Type-C Micro-USB
A four-cable DIY kit with USB 2.0 Type-C, Micro-USB, DC 5.5×2.1 mm and DC 3.5×1.35 mm connectors for backpack-mounted power up to 5 V 3 A, 10 cm each, solder required
- 10 cm cables fit neatly inside a backpack
- Four connector types cover USB-C, Micro-USB and two DC barrel sizes
- Up to 5 V 3 A throughput with USB 2.0 power sources
- Designed for DIY soldering to create custom power leads
- Powers heating pads, LED lights and mobile devices
Backpack Power Cable Set
This LORDWORLD set provides four 10 cm extension cables for DIY backpack power installations. It includes USB Type-C, Micro-USB, DC 5.5x2.1 mm and DC 3.5x1.35 mm connectors to link a power bank with heated pads, lights or mobile devices. Each cable must be soldered by the builder. The kit is intended for custom OEM projects inside bags or enclosures.
USB 2.0 DC 5V 3A Limit
The cables support up to DC 5 V at 3 A when paired with a USB 2.0 source and device. Makers adding heated clothing, LED strips or phone charging to a backpack will find the connector variety useful. Buyers who need longer cables, pre-assembled ends or higher voltage power delivery should look elsewhere.
Solder-Required Assembly
Every cable in the pack arrives without plugs fitted; the user must solder each connection. This single requirement decides whether the set suits the project. If soldering tools or skills are not available, the cables cannot be used as supplied.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 75% of the 5,998 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | LORDWORLD |
Questions about this item
How can I verify the extension cable set delivers the rated 5 V 3 A throughput after I solder and install it?
Use a USB 2.0 power source and a multimeter or USB power meter at the device end to confirm 5 V and up to 3 A under load.
Which connectors are included in the four-piece kit and do I need any extra parts to complete the installation?
The kit contains one Type-C, one Micro-USB, one DC 5.5×2.1 mm and one DC 3.5×1.35 mm cable; you must supply solder, a soldering iron and heat-shrink or insulation yourself.
How do I choose among the four connector types for my heated pad or LED project?
Match the connector to your device's input port — Type-C or Micro-USB for USB-powered gear, 5.5×2.1 mm or 3.5×1.35 mm barrel jack for DC-powered pads and lights.
More in Tech Gadgets & Accessories
