We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black or green circuit board with a CompactFlash slot and 50-pin 1.8 inch IDE connector

LORDWORLD

LORDWORLD CF Compact Flash to 50pin 1.8 Inch IDE SSD Converter Adapter

SKU CH-SY26-MH11W

Converts a CompactFlash card into a 50-pin 1.8-inch IDE SSD with master/slave jumper and silent, vibration-free operation

  • Converts CF cards to 50-pin 1.8-inch IDE SSDs
  • Requires FAT32 formatting for OS installation on CF memory
  • Powers CF card via external floppy drive power socket
  • Silent, vibration-free operation with no moving parts
  • Master/slave jumper included on black or green PCB

CF to 50-pin 1.8-inch IDE adapter

This LORDWORLD adapter converts a CompactFlash memory card into a 50-pin 1.8-inch IDE solid-state drive replacement. It targets technicians and hobbyists who need to boot legacy industrial or embedded systems from solid-state media without mechanical hard drives. The board includes a master/slave jumper and draws power from an external floppy-drive power connector.

Suits legacy IDE maintenance, not modern storage

The adapter suits engineers maintaining older equipment that accepts a 1.8-inch 50-pin IDE device and who want a silent, vibration-free boot medium. It also helps testers who repeatedly reinstall operating systems and prefer inexpensive CF cards that survive sudden power loss with minimal damage. Builders working with newer interfaces cannot use this adapter because it only provides a 50-pin IDE connection. Users needing capacities beyond 32 GB or wishing to avoid a separate floppy power cable should consider other solutions.

50-pin 1.8-inch IDE interface decides fit

The single specification that determines compatibility is the 50-pin 1.8-inch IDE connector; the host must expose this exact header and supply 5 V via a floppy-style power lead. The CF card must be formatted as FAT32 before an operating system is installed. Jumper settings set master or slave mode, and the PCB ships in either black or green.

How it compares

Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 80% of the 5,998 comparable items (median $24.99).

Specifications

Product
Brand nameLORDWORLD

Questions about this item

What type of power connector does the adapter need to run a CF card as a DOM?

The adapter draws power from an external floppy-drive power socket when the CF card is used as a disk-on-module.

Can the adapter work with a legacy 1.8-inch IDE drive that uses a 50-pin interface?

Yes, it converts a CF card to a 50-pin 1.8-inch IDE connection, so it fits the same interface as the older drive.

How can I verify the adapter is functioning correctly after installation?

Format the CF card with FAT32, install the OS, and confirm the system boots without sudden reboots and runs silently with no vibration.

More in Tech Gadgets & Accessories

Similar items