We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with dual 20-pin headers and onboard components

LORDWORLD

LORDWORLD ESP32-P4-Pico development board

SKU CH-MPDB-BB089

IoT development board with dual-core RISC-V processor, 32MB PSRAM, 32MB Flash, MIPI camera and display interfaces, USB 2.0 OTG, SD card slot, audio headers, and 27 programmable GPIOs

  • High-performance RISC-V dual-core and single-core processors enable complex edge tasks
  • 32 MB PSRAM and 32 MB Nor Flash provide ample memory for image and voice processing
  • Hardware JPEG Codec, Pixel Processing Accelerator, ISP and H.264 encoder accelerate multimedia workloads
  • MIPI-CSI, MIPI-DSI, USB 2.0 OTG and SDIO 3.0 TF card slot connect cameras, displays and storage
  • 27 programmable GPIOs on 2×20 headers plus Secure Boot, Flash Encryption and TRNG secure deployments

LORDWORLD ESP32-P4-Pico Development Board

This development board centres on a high-performance ESP32-P4 MCU that combines RISC-V 32-bit dual-core and single-core processors. It integrates 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM and 8 KB TCM. The package includes 32MB PSRAM and onboard 32MB Nor Flash. Onboard peripherals cover MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, microphone and speaker header.

Makers building vision or voice edge devices

The board suits engineers who need JPEG Codec, Pixel Processing Accelerator, Image Signal Processor and H.264 encoder hardware on a compact platform. Security features include Secure Boot, Flash Encryption, cryptographic accelerators, TRNG and hardware access protection for privilege separation. Developers requiring wireless radios, additional GPIO beyond the 27 programmable pins exposed on the 2*20 headers, or a different MCU architecture should evaluate other modules.

Fits into a custom carrier

The 27 remaining programmable GPIOs connect sensors, displays or storage directly. Onboard MIPI-CSI and MIPI-DSI simplify camera and screen integration without extra level-shifters. USB 2.0 OTG provides host or device connectivity for data or power. The TF card slot adds removable storage for logs or model weights. This layout frees PCB space by keeping PSRAM, flash and core peripherals on the module.

How it compares

Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.

Price $36.99
Cheaper than about 60% of the 1,420 comparable items (median $44.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLORDWORLD

Questions about this item

Which power source is required to run the ESP32-P4-Pico board?

Connect a USB 2.0 OTG cable to the onboard USB 2.0 OTG port to supply power and enable flashing.

Will the 2×20 GPIO header on this board fit the same pinout as my existing Raspberry Pi HAT?

The board exposes 27 programmable GPIOs on a 2×20 header; check your HAT's pin assignments against the ESP32-P4-Pico schematic before connecting.

How can I confirm the JPEG Codec and H.264 encoder are functioning after flashing firmware?

Capture an image via the MIPI-CSI interface and verify the board outputs a compressed JPEG or H.264 stream over USB 2.0 OTG or the SDIO 3.0 TF card slot.

More in Single-Board Computers & Dev Kits

Similar items