LORDWORLD Nano Base Board (B) development board for CM5 Lite/eMMC

Compact Carrier for CM5 Lite and eMMC

This LORDWORLD Nano Base Board (B) matches the footprint of the Raspberry Pi Compute Module 5 and carries a single USB 3.2 Gen1 Type A port, one Mini HDMI output and two MIPI 4-lane connectors on 22-pin 0.5 mm FPC sockets. It is built for engineers evaluating the CM5 or embedding it directly into space-constrained end products. The board adds no extra bulk beyond the module itself.

Mini HDMI 4K and USB 3.2 Gen1 limits

The Mini HDMI port can drive a 4K display but the connector is physically smaller than standard HDMI, so a compatible cable or adapter is required. The single USB 3.2 Gen1 Type A port tops out at 5 Gbps shared bandwidth and supplies only the current the CM5 can negotiate; high-draw peripherals will need external power. Both MIPI lanes use the same 22-pin 0.5 mm pitch, limiting cable length and panel selection to that specific FPC format.

Two MIPI 4-lane FPC sockets decide fit

Dual 22-pin 0.5 mm MIPI connectors are the defining I/O for camera or display integration; if your sensors use a different pin count, pitch or lane count this board cannot connect them without a custom adapter. No other video or high-speed interfaces are broken out, so the MIPI sockets alone determine whether the Nano Base Board (B) suits your peripheral set.