LORDWORLD NEMA 14-50P 50A 125/250V Angle Plug 1.06in OD
Rewireable 50 A 125/250 V angle plug accepts cords up to 1.06 in OD and 6 AWG conductors
- Rewireable 50 A 125/250 V plug for dryer and range connections
- UL 94-V0 nylon shell resists heat and meets ROHS REACH standards
- Brass terminals accept 12 to 6 AWG copper wire for secure installation
- Accepts cable up to 1.06 in OD with two strain-relief options included
- Insulated housing and internal dust shield protect contacts in industrial use
NEMA 14-50P Angle Plug for Dryers and Ranges
This NEMA 14-50P angle plug is a rewireable AC power connector rated at 50 amps and 125/250 volts. It suits DIY installations on dryers, ranges and similar heavy-duty appliances. The straight-blade, three-pole, three-wire grounding design meets industrial and commercial wiring requirements.
Thermals, Noise and Power Draw
The nylon housing carries a UL 94-V0 flammability rating and complies with ROHS and REACH. Brass terminals and pure copper pins resist heat rise while maintaining conductivity. An internal dust shield keeps terminals free of contaminants during normal operation. No active cooling or moving parts are present.
Strain Relief Options and Cable Compatibility
Two optional strain-relief inserts are supplied: the 12 AWG insert pairs with the 10 AWG insert for 12 AWG cords, while the 10 AWG insert works alone for 10 AWG cords. Larger cables up to 1.06 inches OD use the metal pressure clamp only. Supported cord types include SJT, STJW, STO, SJTO, SO, ST, SRD and SVO with three conductors from 12 AWG to 6 AWG.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $29.99
- Pricier than about 60% of the 5,998 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | LORDWORLD |
Questions about this item
How do I install the LORDWORLD NEMA 14-50P angle plug and which strain relief do I use for 10 AWG cord?
Strip wires, insert into brass terminals, tighten screws; for 10 AWG cord use only the 10 AWG strain relief, for 12 AWG use both 12 AWG and 10 AWG reliefs together, for larger cables use the metal pressure plate only.
What maintenance or replacement will the LORDWORLD NEMA 14-50P angle plug need over time?
Inspect the nylon shell for cracks or discolouration, check brass terminals for oxidation or loose screws, and verify the PVC strain reliefs remain intact; replace the plug if any heat damage or worn contacts appear.
What is the first limit that appears when the LORDWORLD NEMA 14-50P angle plug runs at 50 A continuously?
The 50 A rating is the hard limit; sustained 50 A load will cause the brass terminals and nylon housing to reach their maximum safe temperature before any other constraint appears.
More in Tech Gadgets & Accessories
Similar items
VEVOR 1100061671 Mini Split Line Set Cover 3 in W 17.6 Ft L PVC
- Other Appliances





