We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB carrier board with E1.S slot and M.2 edge connector, four-pin power header visible

LORDWORLD

LORDWORLD Ruler 1U EDSFF E1.S to NVMe M-Key 4X Carrier Adapter with Power

SKU CH-VR8S-DTRVY

Converts an EDSFF E1.S SSD to an M.2 M-key slot with PCIe 4.0 x4 and requires 4-pin power

  • Connects EDSFF E1.S SSD to M.2 M-key slot via PCIe x4 Rev. 4.0
  • Requires 4-pin power connection for operation
  • Larger PCBA than 2280 form factor — verify clearance
  • Supports double-sided modules up to 1.5 mm component height
  • Enables E1.S storage in IoT, data-centre and server systems

Carrier adapter for EDSFF E1.S SSDs

This LORDWORLD carrier lets you install an EDSFF E1.S solid-state drive into a standard NVMe M-key 4X slot. It bridges the E1.S female connector to a 67-pin M.2 key M male interface running at PCIe x4 Rev. 4.0. A 4-pin power connection is required for operation. The board is physically larger than a 2280 M.2 module.

Suits servers and IoT nodes with M-key slots

It fits builders who need to reuse E1.S drives in platforms that only offer M.2 M-key sockets. The 1.5 mm component-height limit and double-sided assembly support cover most enterprise E1.S modules. Buyers whose chassis cannot accommodate a PCB wider than 2280 mm or who lack a spare 4-pin power header should look elsewhere.

PCIe x4 Rev. 4.0 interface

The adapter presents a PCIe x4 Rev. 4.0 link through a 67-pin M.2 key M male edge connector. This single specification determines whether the host platform can recognise and drive the attached E1.S SSD at full speed.

How it compares

Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.

Price $58.99
Pricier than about 81% of the 5,998 comparable items (median $24.99).

Specifications

Product
Brand nameLORDWORLD

Questions about this item

Should I choose a different carrier if my chassis only fits a 2280 M.2 slot?

The PCB is larger than a 2280 module, so it will not fit in a standard 2280 M.2 slot.

What speed will an E1.S drive actually run at once adapted to M.2?

The adapter passes through a PCIe 4.0 x4 link, so the drive operates at its native Gen 4 x4 bandwidth.

Does the 67-pin M-key connector limit me to PCIe 3.0 or 4.0?

The connector carries PCIe 4.0 x4, so the interface does not cap the drive below Gen 4 speeds.

More in Tech Gadgets & Accessories

Similar items