LORDWORLD USB 2.0 Splitter Adapter Male to A/C/Micro Female PCBA

PCB USB Power Splitter

The LORDWORLD adapter is a bare printed-circuit board that splits one USB 2.0 Type-A male port into three female outputs — Type-A, Type-C and Micro-USB — plus a 2.54 mm pitch header for custom wiring. It is intended for hobbyists and repair technicians who need a compact power-distribution node without an enclosure or cable.

USB 2.0 Power-Only Interface

The upstream Type-A plug carries power only and does not pass data, so the device cannot function as a hub or enumerate downstream devices. Each output shares a single 5 V supply limited to 2 A total, and the board contains no controller chip to negotiate current or manage multiple loads intelligently.

5 V 2 A Shared Capacity

The three ports and the header together draw from the same 5 V 2 A budget, which is sufficient for charging one phone or powering a few low-current modules. Connecting several hungry devices at once will exceed the limit and cause voltage drop or shutdown, so the splitter suits light-duty charging or bench testing rather than multi-device fast charging.