Lubesite Grease Feeder 6 oz 13 psi 250°F
Automatic single-point grease feeder delivers continuous lubrication at 13 psi up to 250°F from a refillable 6 oz polycarbonate reservoir
- Continuous lubrication from a 6 oz reservoir
- Spring-driven at 13 psi for steady delivery
- Operates up to 250 °F in hot environments
- Refillable polycarbonate body with 1/8 in NPT connection
- Starts working down to -10 °F in cold conditions
6 oz continuous grease feeder
The Lubesite grease feeder delivers a steady supply of lubricant to a single point from a 6 fl oz polycarbonate reservoir. It operates continuously at a fixed 13 psi spring force without adjustable flow settings. The unit arrives ready for installation with springs included and a 1/8 in NPT connection.
Check connection and temperature range
Verify that the lubrication point accepts a 1/8 in NPT fitting before ordering. The feeder functions between -10 degrees F and 250 degrees F, so confirm the application stays within these limits. Ensure the mounting location can accommodate the 3 in diameter and 6 in height of the unit.
Fits single-point systems needing constant feed
The refillable design eliminates the need for manual re-greasing intervals on compatible equipment. Its non-adjustable output suits installations where a consistent, low-pressure flow is preferred over metered doses. The red grease colour allows visual confirmation of flow through the transparent housing.
How it compares
Measured against everything we stock in Greases, Lubricants & Dispensers, at today’s prices. Recalculated every night.
- Price $50.99
- Pricier than about 90% of the 122 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | LubeSite |
Questions about this item
Does the 6 fl oz Lubesite feeder arrive with grease already inside or must I supply my own?
The feeder is not pre-filled, so you must supply the grease yourself; the unit is refillable and the red colour shown is only a visual reference.
Should I select a different spring pressure or capacity for a high-temperature bearing?
This model has a fixed 13 psi spring and a single 6 fl oz capacity; no alternative pressures or volumes are offered for this part number.
Will the 250 °F maximum rating hold up on a bearing that runs near that limit continuously?
The feeder is rated to 250 °F maximum and -10 °F minimum, so continuous operation at the upper limit is within the specified temperature range.
More in Greases, Lubricants & Dispensers
Similar items
Lumax Lubrication LX-1316 Heavy Duty Lever Action Barrel Pump 15-55 Gallon
Rectorseal Moly-Rich 71431 Anti-Seize Lubricant 1 lb
- Moly-Rich offers to…
- 3.25 L x3.25 W x4.5…





