We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tiny 4-flute ball-nose end mill, matte grey shank

M.A. Ford

M.A. Ford 16501560 Tuffcut GP 4-flute ball-nose end mill 1/64

SKU CH-ZYB5-HY65N

A 4-flute ball-nose end mill with a 1/64 stub length for precision contouring and profiling in general-purpose milling applications

  • 4-flute ball-nose geometry enables smooth 3-D contouring
  • Stub length increases rigidity for precise shallow cuts
  • 1/64 inch diameter suits fine-detail milling work
  • M.A. Ford manufacturing ensures consistent tool quality
  • California Proposition 65 warning discloses regulated chemical content

Precision stub ball-nose mill for tight contours

The M.A. Ford 16501560 Tuffcut GP is a 1/64-inch diameter, 4-flute ball-nose end mill with a stub length. Its four cutting edges distribute chip load evenly for smoother finishes in profiling, slotting and 3-D contouring operations on CNC and manual milling machines.

Suited for light finishing passes in steel

Machinists who need a small-diameter tool for detailed cavity work will find the stub length adds rigidity and reduces deflection. The tool is not for heavy roughing, deep-pocket milling or high-feed applications where a longer flute or fewer flutes would clear chips more effectively.

1/64-inch diameter decides fit for micro-detail work

This single dimension determines whether the cutter can enter the smallest radii and slots in your programme. Verify the feature size on your drawing before ordering; no other specification overrides this limit.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $29.99
Typical for this category: the median of 5,493 items is $27.99.

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What shank diameter does the 16501560 end mill use, and what collet or holder does it require?

The 1/64-inch diameter shank fits a matching 1/64 collet or a shrink-fit holder with the same bore; verify the collet runout before cutting.

What minimum clearance does the stub-length ball-nose profile need in a fixture or pocket?

The stub flute is shorter than a standard length, so the pocket must expose only the flute depth plus chip clearance; measure the actual flute length on the tool before finalising the setup.

Which step do users most often skip when installing this 4-flute ball-nose cutter in a CNC router?

Many operators forget to tighten the collet nut to the specified torque after the tool seats fully, causing the micro-diameter shank to slip under cutting forces.

More in Bits, Hole Saws & Accessory Kits

Similar items