We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten PLA filament spools in assorted colours on plastic reels

MakerBot

MakerBot MP06572 PLA filament 10-pack 1.75 mm

SKU CH-TJW1-A3ECE MPN MP06572

Ten spools of 1.75 mm PLA filament in assorted colours, each weighing 0.9 kg, for MakerBot Replicator printers

  • Diameter1.75 mm
  • Product colorTrue Green True Blue True Purple True White True Red True Or
  • Main materialPLA plastic
  • Compatible systemsMakerBot Replicator 5th-Generation Printers MakerBot Replica
  • Key featuresPackaged Quantity: 10
  • Overall lengthSpool Diameter : 9.84 in / 25 cm Spool Width: 1.57 in / 4 cm
  • Ten colours in one pack give immediate variety
  • 75 mm diameter works with Replicator 2, 5th-Gen and Z18 printers
  • PLA material prints without a heated bed and reduces warping
  • Non-toxic corn-based resin is safe for beginners and classrooms
  • Each 2.0 lb spool provides long print runs

Ten-colour PLA pack for MakerBot printers

This 10-spool assortment supplies True Green, True Blue, True Purple, True White, True Red, True Orange, True Yellow, Cool Gray, Warm Gray and True Black PLA filament. Each spool is 1.75 mm diameter and weighs 2.0 lbs. The pack is built for MakerBot Replicator 5th-Generation, Replicator Z18 and Replicator 2 printers.

Low-warp material prints without a heated bed

PLA shows much less warping and curling than ABS, so successful prints are possible on unheated build plates. The resin is derived from field corn, nontoxic and gives off a semi-sweet waffle-like smell when heated. Sharp corners and edges reproduce well with a glossy finish.

Spools fit standard MakerBot hubs

Every spool measures 9.84 inches in diameter, 1.57 inches wide with a 2.00 inch hub hole, matching the Replicator spool holder. The 10-pack delivers 0.9 kg per colour for extended multi-colour projects. Buyers needing other diameters or non-MakerBot printers should look elsewhere.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $341.99
Pricier than about 91% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameMakerbot
Model nameMP06572
Product colorTrue Green
True Blue
True Purple
True White
True Red
True Orange
True Yellow
Cool Gray
Warm Gray
True Blac
Size & build
Main materialPLA plastic
Diameter1.75 mm
Overall lengthSpool Diameter : 9.84 in / 25 cm
Spool Width: 1.57 in / 4 cm
Spool Hub Hole: 2 in / 5.08 cm
Diameter: 0.068 in / 0.175 cm
Product weight2.0 lb / 0.9 kg (Each spool)
Shipping weight13.61 kg
Package size457 × 254 × 254 mm
Compatibility
Compatible systemsMakerBot Replicator 5th-Generation Printers
MakerBot Replicator Z18 Printers
MakerBot Replicator 2 Printers

Questions about this item

How do I load the 1.75 mm spool onto a Replicator 5th-Generation printer and what step causes jams?

Place the spool on the holder so filament unwinds counter-clockwise, feed it into the guide tube until the extruder gears grab, then run the load script; skipping the counter-clockwise orientation makes the filament cross-thread and jam.

What will need replacement after printing several kilograms on a Replicator Z18?

The brass nozzle wears from abrasive pigments in the True Color PLA, so plan to swap it every few kilograms; the PTFE guide tube also stiffens with heat cycles and should be changed when retraction becomes inconsistent.

What limit appears first during a long print on a Replicator 2?

The 0.9 kg spool runs out before thermal limits are reached, so the practical ceiling is the 2.0 lb capacity per colour.

More in 3D Printer Filament

Similar items