Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 250 GB IDE desktop drive spinning at 7200 RPM with 8 MB cache and fluid-dynamic bearings
The Maxtor DiamondMax Plus 9 6Y250P0 is a 250GB 3.5-inch internal hard drive built for desktop systems that still rely on the IDE Ultra ATA133 interface. It suits enthusiasts maintaining period-correct retro builds or anyone replacing a failed drive in legacy industrial or embedded equipment.
The bare drive connects directly to a motherboard IDE channel using a standard 40-pin cable and requires a Molex power connector from the supply. Its 7200 RPM spindle and 8MB buffer deliver responsive performance for the platform while the Fluid Dynamic Bearing motor reduces acoustic output during operation.
With 250GB of formatted space the drive comfortably holds a vintage operating system, period applications and a modest media library. The 9ms average seek time keeps file access snappy within the constraints of the ATA-133 bus, though the fixed capacity leaves no room for expansion beyond a single volume.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Maxtor |
| Product line | DiamondMax Plus 9 |
| Model name | 6Y250P0 |
| Total capacity | 250 GB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 9 ms |
| Storage | |
| Cache memory | 8 MB |
| Ports & slots | |
| Interface type | IDE Ultra ATA133 / ATA-7 |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 0.45 kg |
| Package size | 152 × 102 × 51 mm |
The drive has an average seek time of 9ms, which is the primary latency factor under sustained random access workloads.
The Fluid Dynamic Bearing Motors are designed to reduce acoustic output and friction heat compared to traditional ball-bearing spindles.
The system requires a 40-pin IDE connector supporting the ATA-7 standard to communicate with this 3.5-inch bare drive.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?