Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
500 GB desktop drive spinning at 7200 RPM with 16 MB cache and SATA 3.0Gb/s interface
The Maxtor MaXLine Pro 500 7H500F0 is a 500GB desktop internal hard drive built for systems that use the SATA 3.0Gb/s interface. It spins at 7200 RPM with a 16MB cache to handle everyday storage workloads. Features such as Native Command Queuing and Rotational Vibration Compensation help maintain consistent operation. The bare-drive packaging suits integrators and upgrade installations.
This drive suits builders repairing or expanding older desktops, servers or external enclosures that specifically require a 3.5-inch SATA 3.0Gb/s mechanical drive. The 7200 RPM spindle speed and 8.5ms average seek time support general-purpose file storage and boot duties. Buyers who need a faster SATA 6.0Gb/s interface or a solid-state form factor should look at something else. The bare drive ships without cables or mounting brackets.
The single specification that decides fitment is the SATA 3.0Gb/s interface, which must match the host controller on the motherboard or add-in card. A 3.0Gb/s drive will negotiate down on a 6.0Gb/s port but cannot exceed its native 3.0Gb/s transfer ceiling. Verify that the system provides a standard SATA data and power connection for this 3.5-inch unit. No other interface or protocol is supported by this model.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Maxtor |
| Product line | MaXLine Pro 500 |
| Model name | 7H500F0 |
| Total capacity | 500 GB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 8.5 ms |
| Mean latency | 4.17 ms |
| Storage | |
| Cache memory | 16 MB |
| Ports & slots | |
| Interface type | SATA 3.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 0.73 kg |
| Package size | 152 × 102 × 25 mm |
The 7200 RPM rotation reduces average latency to 4.17 ms and combines with the 16 MB cache to deliver quicker file access and smoother multitasking than slower-spinning drives.
The SATA 3.0 Gb/s link sets the maximum interface bandwidth; sustained transfer rates depend on the 7200 RPM platters and 16 MB cache rather than the interface ceiling.
Yes, the 3.5 inch form factor matches standard desktop drive bays and the SATA data and power connectors are the common ones used on current motherboards and power supplies.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?