Maxxima MLS-1827R 18 in Red LED Strip Light 12.8V IP68
Flexible 18 in red LED strip light with IP68 rating and self-adhesive mounting for 12.8V DC applications
- 18 in flexible red LED strip fits tight contours
- IP68 rating resists dust and water ingress
- 8 V DC operation suits vehicle electrical systems
- 6 A draw keeps power consumption low
- 100,000 hr lamp life reduces replacement frequency
Red LED strip for machine-shop lighting
The Maxxima MLS-1827R is an 18 in red LED strip light that runs on 12.8V DC and draws 0.6 A. Its IP68 rating and flexible, flat profile make it suited for wet or dusty machine-shop environments where a durable surface-mounted light is needed.
Self-adhesive mounting with blunt-cut leads
The strip includes a self-adhesive back and a mounting kit for direct surface attachment. Blunt-cut leads let you wire the light into existing 12.8V DC circuits without proprietary connectors, freeing the installer from sourcing specific plug types.
Rated for 100,000 hours of continuous use
LED technology and wire strain relief support a 100,000 hr lamp life under sustained operation. The IP68 seal maintains protection during prolonged exposure to moisture and debris, so brightness remains stable over long shifts rather than fading after short bursts.
How it compares
Measured against everything we stock in Workshop Hardware, Springs & Clamps, at today’s prices. Recalculated every night.
- Price $18.99
- Typical for this category: the median of 383 items is $17.99.
Specifications
| Product | |
|---|---|
| Brand name | MAXXIMA |
Questions about this item
How long can the 0.6 A LED strip run continuously before heat becomes an issue?
The LED technology is rated for 100,000 hours of lamp life under normal 12.8V DC operation.
What noise or heat does the strip produce when powered all day?
Solid-state LEDs generate minimal heat and operate silently with no moving parts or fans.
What power source must I already have to install this 12.8V strip?
A 12.8V DC supply capable of at least 0.6 A with blunt-cut lead connections is required.
More in Workshop Hardware, Springs & Clamps
Similar items
Craftsman CMMT16061 Deep Impact Socket 1/2-Inch Drive 3/4-Inch
- Out-Opening, Narrow…
- Steel
De-Sta-Co 5105-R Vertical Hold-Down Clamp 700 lb Machine Shop Hardware
Carbyne 3-Piece Impact Socket Adapter Set 1/4 3/8 1/2 Drive 3 in. Spring-Loaded Ball Lock
- 0.25 in (0.64 cm)
- On product combined…
Renewable Lubricants Parts Cleaner Degreaser 5 gal Pail 86634 machine shop hardware
- HAWA
Amartisan AM020 20-Piece Hex Bit Set S2 Steel 2.3" Machine Shop Hardware
- 20-Piece Hex Bit Se…
- Steel





