We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ESP32 development board with 2.8 inch screen and 360 degree silicone case

MCDODO

MCDODO ESP32 C5+433 M+ Development Board White

SKU CH-E7BC-A6846

Development board with ESP32S2, 433 MHz and network test modules plus a 2.8 inch screen and 360 degree silicone case

  • Product typeSingle Board Computers
  • Tests network continuity after cable connection
  • 433 MHz A07 module with external mode switching
  • ESP32-S2 pre-flashed with Predator firmware
  • 8 inch screen integrated into module
  • 360° silicone case protects all corners

IoT Edge Device for External Modules

The MCDODO ESP32 C5+433 M+ development board is a new IoT edge device built for external module integration. It features a 2.8 inch screen and a silicone case with 360 degree front and back protection. The board includes a network test module for cable continuity checks and an ESP32S2 module pre-flashed with Predator firmware. A 433M module using the A07 component is also integrated for external mode operation.

Makers needing integrated 433M and network test

This board suits makers who want a single device combining a 433M radio, network continuity testing and a pre-flashed ESP32S2 with a protected screen. The programming interface requires a specific button-hold sequence before USB insertion. Buyers who need a bare module without the silicone case or integrated screen should look at something else. Developers requiring different radio frequencies or a standard programming flow without the Predator firmware will also need another option.

Capacity and headroom with 433M radio

The integrated 433M A07 module handles external mode communication for compatible accessories. The network test function verifies cable continuity and allows manual address setting. The ESP32S2 runs the Predator firmware and the 2.8 inch display provides visual feedback within the 360 degree silicone case. Headroom ends when a project demands a different radio band, a larger display or an unmodified ESP32S2 bootloader. The seven specified components define the fixed capability set.

How it compares

Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.

Price $182.99
Pricier than about 90% of the 1,420 comparable items (median $44.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSingle Board Computers

Questions about this item

What external module with a screen do I need to connect for this development board to function?

The board is designed for an external module with a screen; plug the cable in and use the network test feature to verify continuity and address assignment.

How do I use the 433M A07 module alongside the board's built-in hardware?

Connect the module, enter the Sub-menu, open Advanced Settings to confirm the module is detected, then switch it to external mode for operation.

How can I confirm the ESP32S2 module is correctly programmed with the Predator firmware after setup?

Hold the button on the back right, insert USB to enter programming mode, then check that the 2.8 interface responds as expected for the Predator firmware.

More in Single-Board Computers & Dev Kits

Similar items