NVIDIA Jetson AGX Orin 64GB Development Board 945137300050000
- 12-core Arm Cortex-…
- 64 GB 256-bit LPDDR…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A two-pack of STM32F411CEU6 development boards with 100 MHz Cortex-M4 cores, 512 KB ROM, 128 KB RAM and 2.54 mm I/O headers for embedded projects
This pack supplies two STM32F411CEU6 development boards aimed at students and engineers who want hands-on experience with an ARM Cortex-M4 core. Each board delivers a 100 MHz clock, 128 KB of RAM and 512 KB of flash for embedded firmware projects. The set is not suited for builders who need more storage or higher pin-count variants.
The boards operate from a 3.3 V to 5 V input with an on-board 3.3 V LDO rated at 100 mA maximum output. A USB-C connector includes a diode to prevent power backflow during development. Typical current draw stays well within the regulator limit, so no active cooling is required.
Each unit provides a 20-pin 2.54 mm I/O header, a 4-pin 2.54 mm SW debug header and tactile buttons for KEY (PA0), NRST and BOOT0. High-speed and 32.768 kHz crystal oscillators give reliable timing for USART, I2C, SPI and USBFS peripherals. The pin spacing suits standard breadboards and perfboard prototyping.
Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Single Board Computers |
Solder the headers to the board, then wire the SW debug pins to a programmer; the step often missed is setting the BOOT0 button to enter programming mode before flashing.
The LDO supplies up to 100 mA; keep the load within that limit and ensure adequate airflow so the regulator does not overheat. The USB-C diode prevents back-flow and needs no routine service unless physical damage occurs.
The 3.3V LDO’s 100 mA maximum output current is the first constraint; sustained high-speed operation with peripheral loads can reach that limit and cause voltage drop or thermal shutdown.
More in Single-Board Computers & Dev Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?