We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled transparent PTFE tubing 12 mm OD .250 ID 100 ft

MERCURY

MERCURY PTFE Tubing 1/2" OD .250" ID 100' Trap

SKU CH-9K0A-JY6TQ

PTFE tubing with 1/2" OD and .250" ID supplied in a 100' coil for chemical-resistant fluid transfer

  • Product colorTransparent
  • PTFE material resists chemicals and high temperatures
  • 1/2 inch outer diameter fits standard fittings
  • 250 inch inner diameter controls precise flow
  • 100 foot continuous length reduces joint count
  • Transparent colour allows visual flow inspection

PTFE Tubing for Fluid Transfer

This MERCURY PTFE tubing handles fluid transfer in plumbing and automotive systems. The transparent construction allows visual inspection of flow and blockages. It suits workshops and maintenance teams needing chemically resistant conduit.

Thermal Stability and Low Friction

PTFE material resists temperature extremes and chemical attack without degrading. The smooth .250 bore reduces pressure drop and resists deposit buildup during normal operation. No external power or active cooling is required for the tubing itself.

Replaces Deteriorated Rubber or Nylon Lines

This 100 roll replaces cracked, permeable or collapsed legacy lines in fuel, brake or hydraulic circuits. The upgrade is worth it when original hoses show swelling, discoloration or seepage under pressure. It is not suited for applications requiring larger bore diameters or rigid pipe structural support.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $490.99
Pricier than about 90% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameMERCURY
Product colorTransparent

Questions about this item

How do I install the 1/2" OD PTFE tubing without kinking the .250" ID bore?

Cut the tubing square with a sharp blade, warm it slightly if stiff, then push straight into the fitting until the 1/2" OD seats fully; twisting while inserting often collapses the narrow bore.

What maintenance will the 100' roll of PTFE tubing need over time?

Inspect periodically for surface abrasion or chemical attack; PTFE resists most fluids, so replacement is only needed if the wall shows cuts, flattening or permanent deformation.

At what pressure does the .250" ID tubing reach its limit during sustained use?

The working pressure depends on temperature and fitting style; consult the manufacturer's pressure-temperature chart for the 1/2" OD x .250" ID dimensions before continuous operation.

More in Drain Stoppers, Strainers & Traps

Similar items