We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear D-profile silicone seal strip on a 16.5 ft roll with self-adhesive backing

Meterk ZH-87 Silicone Seal Strip 16.5 Ft Clear

SKU CH-XVRN-4HNXJ

Clear silicone D-type seal strip, 16.5 ft total, self-adhesive for gaps 4-5 mm on windows and doors

  • Total capacity16.5 ft (5.03 m)
  • Typical useWindow & Door
  • Main colorBrown
  • Battery chemistrySilicone
  • Series part numberZH-87
  • Fit and compatibilityOut-Opening, Narrow Stile, Store Front Doors
  • Reduces drafts and noise with D-type foam profile
  • Self-adhesive backing allows quick installation on clean dry surfaces
  • 5 ft total length splits into two 8.25 ft seals
  • Silicone material resists water wind and aging
  • Apply between 55°F and 104°F for reliable adhesion

Clear Silicone Seal Strip 16.5 Ft

This Meterk ZH-87 kit provides a clear silicone D-type foam strip measuring 16.5 feet total, supplied as two 8.25-foot sections. It is designed for homeowners and installers who need to seal gaps on out-opening, narrow-stile or storefront doors and sliding windows against drafts, dust and noise.

Upgrade From Worn Or Missing Weatherstripping

The strip replaces deteriorated or absent seals on compatible doors and windows where the gap measures between 4 mm and 5 mm. The improvement is worthwhile when air leakage, rattling or energy loss through those specific gaps has become noticeable and the surface can be prepared within the required temperature range.

Peel-And-Stick Application With Temperature Limits

Installation uses a self-adhesive backing applied to a clean, dry surface; the protective liner is removed progressively while pressing the strip into place. Adhesion fails if the air and surface temperature is below 13 °C or above 40 °C, so cold-weather fitting requires warming each 15 cm section with a hair dryer before pressing.

How it compares

Measured against everything we stock in Caulking & Sealing Supplies, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 63% of the 631 comparable items (median $16.99).

Specifications

Product
Brand nameMeterk
Product line08
Model nameHand Rivet Nut Setter Kit
Part numberZH-87
Total capacity16.5 ft (5.03 m)
Color and finishClear
Main colorBrown
Series part numberZH-87
Power
Battery chemistrySilicone
Size & build
Main materialPlastic
Compatibility
Fit and compatibilityOut-Opening, Narrow Stile, Store Front Doors
In the box
Units per package1
Number of items16 pack
More details
PaintableNo

Questions about this item

What door gap range does the 9 mm by 6 mm D-type strip suit?

The D-type foam sealer strip fits gaps from 4 mm to 5 mm (5/32 inch to 13/64 inch) and measures approximately 9 mm by 6 mm.

What surface temperature must be reached before applying the self-adhesive backing?

Apply only when the air and surface temperature is between 13 °C and 40 °C (55 °F to 104 °F); if it is 7 °C to 12 °C, warm the tape and surface with a hair dryer in 15 cm sections before pressing it on.

How often should the silicone seal strip be inspected or replaced after installation?

Inspect the strip each season; replace it when the adhesive no longer holds, the foam compresses permanently, or cracks appear in the silicone material.

More in Caulking & Sealing Supplies

Similar items