We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micro 100 BT-4 brazed tool bit, 1.5 inch length, 1/4 inch wide shank, metallic finish

Micro 100

Micro 100 BT-4 Brazed Tool Bit 1.5 In L 1/4 In W

SKU CH-SWVJ-0RQ3Q

Carbide-tipped single-point tool bit with 1.5 in length and 1/4 in shank for lathe turning operations

  • Main materialHAWA
  • Product weight0.01
  • Carbide tip holds an edge for clean cuts
  • Right-hand design suits standard lathe operations
  • 5 in overall length fits compact tool posts
  • 1/4 in shank width matches common holders
  • Weighs only 0.01 lb for easy handling

Brazed Tool Bit for Machining

Micro 100 BT-4 is a single-point carbide tool bit designed for right-hand cutting operations. It suits machinists and maintenance technicians who need a durable brazed insert for general-purpose turning or facing tasks on a lathe.

Thermals Noise and Power Draw

As a solid carbide hand tool it produces no operational noise and draws no electrical power. Heat generated during cutting depends entirely on the workpiece material, cutting speed and coolant use rather than the tool itself.

1.5 Inch Length and Quarter Inch Shank

The bit measures 1.5 in overall length with a 1/4 in shank width, made from HAWA carbide with a zinc brazing alloy. It weighs 0.01 lb. Buyers who need a larger shank or a different tool geometry should select another model.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $31.99
Pricier than about 61% of the 2,474 comparable items (median $23.99).

Specifications

Product
Brand nameMicro 100
Size & build
Main materialHAWA

Questions about this item

How do I mount the 1.5-inch Micro 100 BT-4 bit in my tool holder, and what alignment step is often missed?

Clamp the 1/4-inch shank squarely in the holder so the carbide tip sits on centre height; the step most often missed is verifying tip height with a reference surface before tightening.

What maintenance will the HAWA carbide tip need after extended use?

The tip will dull gradually; dress it on a fine diamond wheel or replace the bit when the edge no longer produces a clean finish.

What limit appears first during a long facing cut with this 0.01 lb bit?

Vibration from the small shank cross-section usually limits depth of cut before the carbide itself wears.

More in Utility & Specialty Hand Tools

Similar items