We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micro 100 carbide engraving tool 6.00 mm 90 degree AlTiN coated

Micro 100

Micro 100 RNCM-040-1X Engraving Tool 6.00mm 90° Carbide AlTiN

SKU CH-E1J4-K9ZNT

Single-flute 90° carbide engraving tool with AlTiN coating and 6.00 mm length of cut

  • 90° point angle creates precise engraving lines
  • Carbide substrate resists wear for extended tool life
  • AlTiN coating reduces friction and heat buildup
  • 00 mm cut length suits detailed work
  • Micro 100 brand delivers consistent manufacturing quality

Engraving Tool 6.00 mm 90° Carbide AlTiN

The Micro 100 RNCM-040-1X is a single-flute engraving tool ground from solid carbide and coated with AlTiN. It is built for CNC operators and machinists who need precise v-groove marking or light profiling in a range of metals. The 90-degree included angle produces clean, sharp characters and decorative lines.

Carbide Substrate with AlTiN Coating

The carbide body resists wear and holds a keen edge longer than high-speed steel when cutting abrasive alloys. The AlTiN layer adds high-temperature stability and lubricity, allowing higher spindle speeds and reducing built-up edge on stainless steels and titanium without requiring coolant in many light-engraving passes.

6.00 mm Length of Cut Constraint

The 6.00 mm length of cut limits the maximum depth of a single pass, so deep characters require multiple step-downs. The fixed 90-degree geometry cannot produce narrower or wider groove profiles without a tool change, and the tool is not suited for heavy material removal or roughing operations.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 64% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameMICRO 100

Questions about this item

Will the 90° carbide tip with AlTiN coating need re-sharpening after extended use?

The carbide construction with AlTiN coating resists wear longer than uncoated steel, but the 6.00 mm length of cut will eventually dull and require professional re-grinding or replacement.

What limits continuous engraving time before the tool overheats?

Heat builds in the carbide body during sustained cutting; the 90° included angle concentrates load, so intermittent passes and coolant pauses are needed to maintain edge integrity.

How much vibration and noise does this single-flute engraver produce in a CNC spindle running all day?

A single 6.00 mm carbide flute runs quieter than multi-flute cutters, yet high spindle speeds still generate audible whine and minor harmonic vibration transmitted to the machine frame.

More in Bits, Hole Saws & Accessory Kits

Similar items