We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micro 100 RNCM-060-2X carbide engraving tool 8.00 mm 90° AlTiN coated

Micro 100

Micro 100 RNCM-060-2X Engraving Tool 8.00 mm 90° Carbide AlTiN

SKU CH-HGF8-C5T38

Double-end carbide engraving tool with 8.00 mm cut length and 90° angle

  • Double-ended design gives two cutting edges per tool
  • 90° included angle produces clean V-grooves and chamfers
  • Solid carbide body resists wear in abrasive materials
  • AlTiN coating reduces friction and extends tool life
  • 00 mm length of cut suits a range of engraving depths

Micro 100 Engraving Tool 8.00 mm

The Micro 100 RNCM-060-2X is a double-ended engraving tool made from carbide with an AlTiN coating. It suits machinists and engravers who need a 90 degree included angle for V-grooving, chamfering or marking tasks in a workshop or light production environment.

8.00 mm length of cut capacity

The tool provides an 8.00 mm length of cut, giving enough reach for shallow to medium-depth engraving passes in metals and plastics. Deeper profiles or heavy stock removal will exceed the flute length and require a different tool or multiple setups to avoid deflection.

Carbide AlTiN coating limits

Carbide construction with AlTiN coating resists heat and wear during high-speed spindle work, but the material is brittle and can chip under interrupted cuts or excessive feed rates. The 90 degree geometry fixes the groove profile, so applications needing other included angles must use a separate cutter.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $30.99
Typical for this category: the median of 5,493 items is $27.99.

Specifications

Product
Brand nameMICRO 100

Questions about this item

Will the 8.00 mm cutting length suit the same collet and spindle I already run on my CNC router?

The tool is built with an 8.00 mm length of cut and a 90-degree included angle, so it fits standard ER collets and holders that accept that shank dimension.

How do I verify the AlTiN coating is performing correctly once the tool is installed?

Check for consistent chip colour and clean edge finish on the first test pass; AlTiN should run cooler and show gold-purple wear marks rather than blue oxidation.

Does the package include any collets, holders or mounting hardware, or must I source them separately?

Only the carbide engraving tool itself is supplied; collets, tool holders and any mounting hardware are sold separately.

More in Bits, Hole Saws & Accessory Kits

Similar items