We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbide engraving tool 60 degree uncoated tip half inch length

Micro 100

Micro 100 RSC-250-120 Engraving Tool 60 Degrees Carbide Uncoated 0.0100 in 1/2 in

SKU CH-P5XP-7HW2P

Carbide engraving tool with a 60-degree tip and 0.0100 in width for 1/2 in depth of cut

  • 60-degree tip cuts clean lines in hard materials
  • Carbide body resists wear for long service life
  • Uncoated surface suits dry machining without buildup
  • 0100-inch width produces fine detail work
  • Half-inch cut length reaches into tight spaces

Engraving Tool 60 Degrees Carbide

This Micro 100 engraving tool is a single uncoated carbide cutter with a 60 degree included angle. It is intended for machinists and fabricators who need precise V-groove engraving or chamfering in a range of materials. The 1/2 inch length of cut provides reach for shallow detailing work. The tool is supplied new and ready for use in compatible holders.

Upgrade from worn or general-purpose cutters

A fresh 60 degree carbide engraver replaces dull high-speed steel or multi-angle tools that leave inconsistent groove profiles. The jump is worth it when repeatable angle accuracy and longer edge life reduce scrap on production runs. Carbide hardness maintains the 60 degree geometry through extended cuts in aluminium, plastics and softer steels. Orders of 75 or more ship free directly from the manufacturer.

Check holder compatibility before ordering

Verify that your tool holder accepts the shank diameter implied by the RSC-250-120 designation and that the machine spindle can run at speeds suitable for uncoated carbide. Confirm the 0.0100 inch tip width matches the feature size required by your engraving programme. Ensure the 1/2 inch length of cut clears the workpiece fixtures without interference. The item is not restricted for sale in any state.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 62% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameMICRO 100

Questions about this item

What shank diameter does the RSC-250-120 engraving tool need to fit my holder?

The tool has a 1/2 in shank, so it fits any standard 1/2 in toolholder or collet without an adapter.

How do I install the carbide tip without chipping the 60-degree edge?

Clamp the 1/2 in shank securely, then tighten the holder evenly; forcing the tip into a misaligned collet cracks the uncoated carbide.

When should I replace the 0.0100 in tip on this engraving tool?

Replace it when the 0.0100 in point shows visible wear or the 60-degree angle no longer cuts clean lines in the workpiece.

More in Bits, Hole Saws & Accessory Kits

Similar items