We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micro 100 carbide engraving tool 7.00 mm AlTiN coated

Micro 100

Micro 100 RSCM-030-2X Engraving Tool 7.00 mm Carbide AlTiN

SKU CH-FRQD-ZNZQ2

Double 60-degree carbide engraving tool with AlTiN coating and 7.00 mm length of cut

  • Double-ended design gives two cutting edges per tool
  • 60-degree included angle produces clean V-groove engraving
  • Solid carbide construction resists wear in abrasive materials
  • AlTiN coating extends life in high-speed applications
  • 00 mm length of cut suits fine detail work

Engraving Tool 7.00 mm Carbide AlTiN

The Micro 100 RSCM-030-2X is a double-ended engraving tool with a 60 degree included angle. It is manufactured from solid carbide and coated with AlTiN for wear resistance. The metric shank suits CNC engraving operations in metals and plastics.

Practical limits of a 60 degree carbide engraver

The 60 degree point concentrates cutting forces, so feed rates must stay conservative to avoid chipping the tip. Carbide is brittle and will fracture if the tool deflects or encounters hard inclusions. AlTiN coating extends life in abrasive alloys but cannot prevent breakage from excessive side loads.

Installation and common issues

The tool clamps in a standard ER collet or shrink-fit holder; runout must be minimal to keep both flutes cutting evenly. Vibration from excessive stick-out or loose clamping is the main cause of poor finish and premature wear. Always verify the 7.00 mm length of cut matches the programmed depth before starting.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 66% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameMICRO 100

Questions about this item

Should I choose the 7.00 mm length of cut or a different size for my engraving work?

This tool has a fixed 7.00 mm length of cut; choose it when your design requires that reach, otherwise select a tool with a different cut length.

What does the 60 degree angle mean when I put this tool in my machine?

The 60 degree included angle produces a V-shaped groove with 30 degree side walls, determining the profile and width of each engraved line.

How does the AlTiN coating affect performance on a CNC router?

The AlTiN coating increases hardness and heat resistance, allowing higher cutting speeds and longer tool life in abrasive or high-temperature materials.

More in Bits, Hole Saws & Accessory Kits

Similar items