We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micro 100 carbide engraving tool 30 degree tip AlTiN coated 7.00 mm length of cut

Micro 100

Micro 100 RTCM-030-2X Engraving Tool 30 Degrees Carbide AlTiN 7.00 mm

SKU CH-B3FH-KV0ZG

Double-ended carbide engraving tool with a 30-degree tip, AlTiN coating and 7.00 mm cut length

  • 30-degree tip cuts precise engraved lines
  • 00 mm carbide length of cut handles deep marks
  • AlTiN coating resists heat and wear
  • Carbide body keeps edge sharp longer
  • Double-ended design gives two tips per tool

Double-ended 30-degree engraving tool

The Micro 100 RTCM-030-2X is a carbide engraving tool designed for precision marking and detailing in machining operations. Its double-ended configuration provides two cutting points, effectively doubling tool life for high-volume workshops. The 30-degree included angle suits fine V-groove work and lettering on a variety of workpiece materials.

7.00 mm length of cut with AlTiN coating

The tool offers a 7.00 mm length of cut, giving adequate reach for shallow to medium-depth engraving passes in metals and plastics. The aluminium titanium nitride coating reduces friction and resists heat buildup, allowing higher spindle speeds and longer intervals between tool changes. Cutting performance drops off when engagement exceeds the stated length or when used on extremely abrasive alloys without coolant.

Replaces single-ended carbide engravers

Upgrading from a single-ended carbide engraver is worthwhile when changeover time dominates cycle time or when tool cost per edge is a concern. The double-ended design eliminates the need to reset tool length offsets as often, but it does not suit applications requiring a different included angle or a longer reach than 7.00 mm.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 64% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameMICRO 100

Questions about this item

Will this 30-degree carbide engraving tool fit the same collet or holder I use for other Micro 100 accessories?

The tool has a 7.00 mm length of cut and a 30-degree included angle; match those dimensions to your existing collet or holder specifications to confirm fit.

How can I verify the AlTiN coating is performing correctly after the first engraving pass?

Inspect the cut edges for clean, burr-free lines and consistent depth; AlTiN reduces built-up edge, so a smooth finish at the 30-degree angle indicates proper coating function.

Does the package include any collets, shims or mounting hardware, or must they be purchased separately?

The box contains only the double-ended carbide engraving tool; collets, shims and any mounting hardware are sold separately.

More in Bits, Hole Saws & Accessory Kits

Similar items