We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat steel VESA bracket with adjustable standoffs and mounting hardware

Micro Connectors

Micro Connectors RAS-VE03 VESA Mount Adapter 75 x 75mm 100 x 100mm

SKU CH-CSM8-GJ9MS MPN RAS-VE03

A VESA mount adapter with adjustable standoffs for 75×75 mm or 100×100 mm patterns, built from 1.5 mm SECC steel

  • Key featuresSupports standard VESA mount specification of 75 × 75 mm or
  • In the boxVESA mount adapter, standoffs, screw nuts, screws
  • Fits 75 x 75mm and 100 x 100mm VESA patterns
  • Adjustable standoffs suit most wall-mount cases
  • 5mm SECC steel gives rigid mounting
  • Compact 114.4 x 23.9 x 5.2mm footprint
  • Supplied with standoffs, nuts and screws for installation

VESA 75 and 100 Mount Adapter

The Micro Connectors RAS-VE03 is a VESA mount adapter built for Raspberry Pi wall-mount cases. It fits the standard 75 x 75mm and 100 x 100mm hole patterns found on monitors and mounting arms. Adjustable standoffs allow alignment with the majority of compatible case designs. The kit includes the adapter, standoffs, screw nuts and screws for a complete installation.

Fixed Hole Spacing and Steel Thickness

The adapter only works with the two VESA pitches listed; it cannot accommodate non-standard or proprietary mounting grids. Its 1.5mm SECC steel construction sets the physical thickness at 5.2mm, which adds a fixed offset between the case and the mounting surface. The 114.4mm length and 23.9mm width define the maximum footprint, so the mounting surface must provide at least that much flat area.

Replaces Improvised Brackets and Tape

This adapter replaces makeshift brackets, double-sided tape or zip-tie arrangements that fail under vibration or heat. The jump is worth it when the Raspberry Pi case has VESA mounting holes but no dedicated hardware to attach them to a 75mm or 100mm grid. It is not for cases lacking VESA holes, for mounting patterns outside the two supported standards, or for installations that require a thinner stand-off than the fixed 5.2mm profile.

How it compares

Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 96% of the 1,420 comparable items (median $44.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMicro Connectors
Model nameRAS-VE03
Size & build
Shipping weight0.05 kg
Package size178 × 81 × 11 mm
In the box
In the boxVESA mount adapter, standoffs, screw nuts, screws

Questions about this item

Should I pick the 75 x 75mm or 100 x 100mm VESA pattern for my monitor?

The adapter includes both 75 x 75mm and 100 x 100mm hole patterns so you can match whichever pattern your monitor or arm uses.

What does the 1.5mm SECC steel thickness mean once the adapter is mounted?

The 1.5mm steel sheet provides a rigid bracket that resists flex when a Raspberry Pi case is screwed to a VESA arm.

How do the adjustable standoffs work with the VESA 75 and 100 standards?

Standoffs slide to align with either the 75mm or 100mm hole spacing, then lock down with the supplied nuts and screws.

More in Single-Board Computers & Dev Kits

Similar items