Milwaukee Valve 149.75 Gate Valve 3/4 in Bronze Class 125
Bronze gate valve controls gas, oil or water flow up to 200 psi with a 17.6 Cv rating and rising-stem wheel handle
- Size3/4 in
- Reliable flow control for gas, oil and water service
- Bronze body and solid wedge withstand 200 psi operating pressure
- Rising bronze stem gives clear visual indication of valve position
- 6 Cv rating supports efficient media transfer
- Screw-in bonnet and sweat connection simplify installation
Bronze gate valve for water, oil and gas lines
This 3/4 in bronze gate valve handles water, oil and gas at up to 200 psi and 125 psi steam. The solid bronze wedge and bronze seat seal directly against the bronze body. A rising bronze stem with a wheel handle shows valve position at a glance.
Sweat connection suits copper plumbing systems
The sweat end slides onto 3/4 in copper tube for a permanent brazed joint that resists vibration and leakage. No threads or flanges are required, so the valve fits tight spaces where a wrench cannot reach. The screw-in bronze bonnet allows internal access without removing the valve from the line.
Replaces worn bronze gate valves in existing
Builders upgrading a leaking or seized valve of the same size and pressure class can swap this unit directly. The jump is worthwhile when the old valve no longer shuts off cleanly or when stem packing fails. It is not suited for systems that require threaded, flanged or press-fit connections.
How it compares
Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.
- Price $33.99
- Cheaper than about 56% of the 1,499 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | MILWAUKEE VALVE |
| Product type | Other |
| Size & build | |
| Size | 3/4 in |
Questions about this item
What is the maximum operating pressure this gate valve can handle before it becomes the limiting factor?
The valve is rated for a maximum operating pressure of 200 psi, which sets the limit for sustained use with gas, oil, or water.
How much heat does the bronze body and stem generate during continuous operation?
The bronze construction does not generate heat itself; temperature rise depends on the media flowing through the valve and the surrounding environment.
What piping preparation is required for the sweat connection on this 3/4 inch valve?
The sweat end requires copper tubing and soldering equipment to create a permanent, leak-free joint during installation.
More in Bath Accessories & Soap Dispensers
Similar items
Jay R. Smith Mfg. Co 8000GASKET15F Neoprene Gasket 180 in
- 180 in (457 cm)
Broan-NuTone, LLC 413023 Black Non-Ducted Range Hood
- Space Savers
Beck C. H. 0331046201 3" MNPT x 5" TBE Galvanized Steel Pipe Nipple Sch 40 bathware
- Transparent
- Pipes, Valves & Fit…





