Milwaukee Valve 572 Globe Valve 1-1/2" Bronze FNPT 600 psi bathware
Bronze globe valve with rising stem and hand-wheel handles 600 psi fluid and 300 psi steam at 550 °F
- Size1-1/2 in
- Bronze body resists corrosion for long service life
- Rising stem design shows valve position at a glance
- 600 psi fluid rating handles demanding plumbing systems
- 550 °F max temperature suits hot water and steam lines
- Class 300 construction meets high-pressure piping standards
Milwaukee Valve 572 Globe Valve
The Milwaukee Valve 572 is a bronze globe valve designed for fluid and steam control in plumbing and heating installations. Its 1-1/2 inch FNPT connections suit piping that requires a reliable shut-off and throttling point. The rising stem and hand-wheel operation give clear visual indication of valve position during use.
Bronze body and Class 300 rating
The bronze construction resists corrosion from water and steam, while the Class 300 rating supports up to 600 psi fluid pressure and 300 psi steam pressure. FNPT threads on both ends allow direct installation into threaded pipe without additional fittings. The 4-1/2 inch face-to-face length and 7-3/4 inch handle height determine the space needed in the piping layout.
Verify pressure, temperature
Confirm that the system operating pressure does not exceed 600 psi for fluids or 300 psi for steam. Ensure the maximum fluid temperature of 550 degrees Fahrenheit covers the application. Check that the existing piping uses 1-1/2 inch FNPT threads and that sufficient clearance exists for the 7-3/4 inch handle height.
How it compares
Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.
- Price $272.99
- Pricier than about 90% of the 1,499 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | MILWAUKEE VALVE |
| Product type | Other |
| Size & build | |
| Size | 1-1/2 in |
Questions about this item
What pressure does the 600 psi rating cap for this bronze globe valve?
The 600 psi rating is the maximum fluid pressure; steam is limited to 300 psi WSP and air pressure is not rated for this valve.
What piping preparation does the 1-1/2 inch FNPT connection require?
The valve has female NPT threads on both ends, so you need 1-1/2 inch male NPT pipe nipples or fittings and thread sealant rated for 550 °F fluid temperature.
How is the rising-stem hand-wheel valve installed, and what step is often missed?
Install with flow direction matching the body arrow, tighten on the hex flats only, then cycle the hand wheel fully open and closed once to verify the rising stem moves freely without binding.
More in Bath Accessories & Soap Dispensers
Similar items
ASCO Power Technologies 322770 Rebuild Kit for 4ELL8 4ELL9 4ELN1 4ELN2
Broan-NuTone, LLC 413023 Black Non-Ducted Range Hood
- Space Savers
ASCO Power Technologies 302328 Valve Rebuild Kit 8210G087 8210G088
Unitherm IW4218 12 x 42 in Fiberglass Insulated Pipe Jacket 3 in Wall
- Gray
- Pipes, Valves & Fit…





