Mohawk
Mohawk LKV372A 60m 1080P HDMI Extender Cat6/6a/7 IR Remote
Extends 1080p HDMI up to 60 metres over a single Cat6/6a/7 cable with IR remote control included
- Cable typeRemote Control
- 1080P HD video up to 60m over single Cat6 cable
- Lossless transmission auto-adjusts for cable lengths 1-60m
- Plug-and-play hardware design needs no drivers
- IR remote control works across 20-60KHz frequency range
- Includes IR emitter and receiver cables for source control
60m 1080P HDMI Extender with IR
This HDMI extender sends 1080P video, HD audio and 3D signals up to 60 metres over a single Cat6, Cat6a or Cat7 cable. It is built for installers and home users who need to bridge long distances between a source and a display without running an HDMI lead. The kit includes IR emitter and receiver cables for remote control of the source device from the display location.
Maximum reach over Cat6/6a/7
The extender guarantees lossless transmission up to 190 feet when the link cable follows the IEEE-568B wiring standard. For best results the supplier recommends a cable run of at least 45 feet. The unit automatically adjusts its parameters for any length between 1 and 60 metres to maintain a stable picture.
Passive hardware operation
The device uses a pure hardware design with no drivers or software required, so it runs silently and draws minimal power from the connected equipment. Heat output is negligible in normal use and there are no moving parts to generate noise. It supports IR frequencies from 20 to 60 kHz for reliable remote control passthrough.
How it compares
Measured against everything we stock in Shutter Remotes & Camera Cables, at today’s prices. Recalculated every night.
- Price $82.99
- Pricier than about 90% of the 249 comparable items (median $17.99).
Specifications
| More details | |
|---|---|
| Cable type | Remote Control |
Questions about this item
What resolution does the 1080P extender actually deliver on the display?
The unit transmits full 1080P HD video with HD audio and 3D support, matching the source signal up to the rated distance.
Which cable standard limits the maximum reach of this extender?
It requires a single Cat6, Cat6a or Cat7 cable following the IEEE-568B wiring standard to achieve the full range.
How much Cat6 cable is needed to connect the transmitter and receiver units?
One Cat6, Cat6a or Cat7 cable between 15 m and 60 m links the TX and RX; shorter runs under 15 m are not recommended for best performance.
More in Shutter Remotes & Camera Cables





