Montech HP140 ARGB PWM 140mm Black 600-1600 RPM
A 140 mm case fan with ARGB lighting, PWM control, 600-1600 RPM speed range, 90.5 CFM airflow and 29.2 dB noise
- Fan size140 mm
- LED lightingARGB
- Product typeCase Fan
- Product colorBlack
- High airflow with up to 95.61 CFM cooling performance
- Quiet operation at just 29.2 dB noise level
- Wide 600 to 1600 RPM speed range for flexible control
- ARGB lighting adds customisable colour to your build
- Durable rifle bearing ensures long-lasting reliability
140mm ARGB PWM Case Fan
The Montech HP140 is a 140mm case fan with a 4-pin PWM connector and addressable RGB lighting. It uses a rifle bearing and spins between 600 and 1600 RPM to deliver up to 95.61 CFM of airflow at a rated 29.2 dB noise level. The black frame and blades suit dark-themed builds.
Who this suits and who it does not
This fan fits builders who want PWM speed control and ARGB synchronization on a 140mm mount. It is not for systems that only offer 3-pin voltage headers or lack ARGB headers for lighting control. Cases without 140mm mounting positions cannot use it.
Deciding specification
The 4-pin PWM connector is the single detail that determines compatibility; the motherboard or fan controller must provide a 4-pin header to enable automatic speed regulation between 600 and 1600 RPM.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 90% of the 8,339 comparable items (median $19.99).
- Fan size 140 mm
- Higher than about 80% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Size & build | |
| Fan size | 140 mm |
| More details | |
| LED lighting | ARGB |
Questions about this item
Will the 4-pin PWM connector on the Montech HP140 let my older motherboard control the 600-1600 RPM speed range automatically?
Yes, the 4-pin PWM header lets the motherboard vary the fan speed across the full 600-1600 RPM range, so an older board with a standard 4-pin header can regulate it without adapters.
How can I confirm the ARGB lighting and 29.2 dB noise level are working correctly once the fan is installed?
Check that the ARGB LEDs illuminate and respond to your motherboard software, then listen at idle — the fan should run quietly at or near the rated 29.2 dB when spinning at the lower end of its 600-1600 RPM range.
Does the box include the ARGB controller or splitter cables, or do I need to buy them separately for the 4-pin and ARGB headers?
The fan ships with the 4-pin PWM and ARGB cables attached to the unit; any additional splitters, hubs or standalone ARGB controllers for multiple fans must be purchased separately.
More in PC Cooling Fans
Similar items
Phanteks PH-F120M25_G2_DWT01 120mm 25mm ARGB case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
BGears b-Blaster 60 60mm 5500 RPM 40 CFM 3-pin case fan
- 60 mm
- 1 Fan
Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 120 mm
- 1 Fan
BGears b-Blaster 90 90mm 3500 RPM 78 CFM 39 dBA 3-pin case fan
- 1 Fan
- No Controller





