We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Morse CTS315 50 mm carbide tipped hole cutter, silver metal body with ground teeth and pilot drill

Morse

Morse CTS315 50 mm Hole Cutter, Metal

SKU CH-DFRP-0CAZ1

Cuts 50 mm holes in sheet metal with carbide-tipped teeth, a step pilot drill and an ejector spring for clean slug removal

  • Cuts clean 50 mm holes in sheet metal with ground tooth profile
  • Step center pilot drill reduces break-through impact on control panels
  • Shouldered body prevents pass-through to protect electrical components at shallow depths
  • Ejector spring speeds slug removal for faster workflow
  • Replaceable pilot drill 166010 and ejector spring 166027 extend tool life

Morse CTS315 50 mm Hole Cutter

The Morse CTS315 is a carbide tipped hole cutter built for 50 mm diameter cuts in sheet metal. It suits electricians and panel builders preparing control panels or electrical boxes. The ground tooth profile produces clean, fast cuts. One cutter is supplied per box.

Pilot drill and ejector spring

A step center pilot drill reduces breakthrough impact when the cutter exits the material. An ejector spring eases slug removal after each cut. Replacement pilot drill CTSP (166010) and ejector spring CTSS (166027) are available separately. These parts keep the cutter running without buying a new unit.

Shouldered body and mounting

The shouldered cutter body prevents pass through, protecting components behind shallow panels. The cutter mounts in a standard drill chuck for handheld or press use. Carbide tips resist wear in mild steel and aluminium. Buyers needing larger diameters or non metal materials must choose a different cutter.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $51.99
Pricier than about 68% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameMORSE

Questions about this item

How often will the CTSP 166010 pilot drill and CTSS 166027 ejector spring need replacing on the Morse CTS315?

The Morse CTS315 uses a replaceable CTSP 166010 pilot drill and CTSS 166027 ejector spring. Both parts are available separately so you can swap them when the drill dulls or the spring loses tension.

What limits continuous cutting with the 50 mm carbide-tipped cutter on sheet metal?

The shouldered body stops the cutter at shallow depth to protect components behind the panel, so maximum cut depth is the practical limit during sustained use.

Does the Morse CTS315 generate much heat or vibration when run all day in a control panel?

The ground tooth profile and carbide tips keep cutting fast and clean, reducing friction and heat buildup during extended sheet metal work.

More in Bits, Hole Saws & Accessory Kits

Similar items