Movo MV-M1 Dynamic XLR Cardioid Handheld Vocal Microphone
A dynamic cardioid handheld vocal microphone with an on/off switch and no power required
- Product typeAccessory
- Cardioid pattern rejects off-axis sound for clear vocals
- Dynamic transducer needs no phantom power or batteries
- Frequency response 60 Hz to 14 kHz captures speech detail
- Balanced XLR output ensures low-noise connection to mixers
- Lightweight 170 g body with on/off switch for stage control
Vocal microphone for stage and studio
The Movo MV-M1 is a dynamic XLR handheld microphone built for singers, speakers and instrumentalists who need a reliable cardioid pickup without phantom power. Its uni-directional pattern focuses on the source in front while rejecting ambient noise from the sides and rear.
Sustained use behaviour
The transducer delivers a frequency response of 60Hz to 14 kHz with a sensitivity of -75dB at 1 kHz, maintaining consistent output during long sets or extended recording sessions. An integrated on/off switch allows instant muting between passages without unplugging the cable.
What it replaces and when to upgrade
This microphone replaces a basic wired vocal mic that lacks an on-body switch or requires external power, giving performers direct mute control and plug-and-play simplicity. It is not suited for users who need a wider high-frequency extension beyond 14 kHz or a condenser-level sensitivity for quiet studio sources.
How it compares
Measured against everything we stock in Camera Extras & Accessory Packs, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 89% of the 2,266 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Product type | Accessory |
Questions about this item
How much heat or noise does the MV-M1 add when it runs all day?
The MV-M1 is a passive dynamic microphone with no electronics, so it generates no heat and no self-noise during continuous use.
What equipment must I already own to use the MV-M1?
You need a mixer, audio interface or recorder with a 3-pin XLR input and enough gain for a -75 dB sensitivity mic.
Will the MV-M1 work with my older mixer that only has 1/4-inch inputs?
The MV-M1 terminates in a 3-pin XLR male connector; a simple XLR-to-1/4-inch adapter lets it plug into legacy mixer channels.
More in Camera Extras & Accessory Packs
Similar items
Weinandianzi WN-L2109.K229L USB Camera Module 2MP 30fps 65° Fixed Focus
- 13 × 9 × 9 cm
- Black
Kodak Deluxe Neck Strap Color Kit 6 pack camera accessory
- ROD2 × 3NSKIT
TeKit LH37 Reversible Lens Hood for Nikon 55-200mm & 85mm
- Accessory
- 1-Pack





