Mueller Industries, Inc. 06113 PVC Sanitary Street Tee Trap 2 in Schedule 40 Spigot x Hub x Hub White
PVC sanitary street tee connects 2-inch drain lines at 140 °F max with Schedule 40 spigot and dual hub ends
- Product typeDrain Components
- Schedule 40 PVC resists corrosion and handles 140 °F water
- Spigot-by-hub-by-hub design simplifies DWV branch connections
- Meets ASTM D2665, D3311, D3965 and F1498 standards
- NSF International listing confirms safe potable-water use
- Compact 2.75 in length fits tight drain assemblies
PVC Sanitary Street Tee 2 in
This Mueller Industries PVC sanitary street tee connects a 2 in spigot to two hub ends for drain, waste and vent installations. It is intended for plumbers and contractors assembling non-pressure drainage systems in residential or light commercial projects.
Schedule 40 PVC rated to 140 Degrees F
The Schedule 40 fitting carries ASTM D2665, D3311, D3965 and F1498 listings plus NSF International compliance. It is not rated for pressure applications and the maximum service temperature is 140 Degrees F, so sustained hot-water flow above that level must be avoided.
Check pipe size and connection type before ordering
Verify that your existing system uses 2 in Schedule 40 PVC and requires a spigot-by-hub-by-hub configuration. The overall fitting length is 2.75 in, so confirm the available space in the assembly. This tee is not suitable for pressurised lines or high-temperature service.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 92% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Mueller Industries |
| Model name | 06113 |
| Product type | Drain Components |
Questions about this item
Does the PVC tee generate any noise or heat when water runs through it all day?
The fitting is a passive Schedule 40 PVC component with no moving parts, so it produces no noise or heat during continuous drainage flow.
What existing pipe and solvent cement must I already have to install this 2-inch spigot-by-hub tee?
You need 2-inch Schedule 40 PVC pipe and a solvent cement that meets the ASTM standards referenced for the fitting, plus primer if your local code requires it.
Will this Schedule 40 street tee connect directly to older ABS or metal drain lines I plan to keep?
The hub ends accept 2-inch Schedule 40 PVC only; joining to ABS or metal requires listed transition couplings approved for those materials.
More in Drain Stoppers, Strainers & Traps
Similar items
Cherne
Cherne 270237 3 in End-of-Pipe Plug with Wing Nut
- Drain Components
- HAWA
$5.99
0.00007308BTC
In stock
Nomaco Kflex
Nomaco Kflex 801-T-048238 Trap 2-3/8" x 59/64
- Drain Components
- Black
$5.99
0.00007308BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017068BTC
In stock