Mueller Industries, Inc. 1WKC5 3" Hub PVC DWV 45 Degree Elbow
A 3-inch PVC drain elbow connects hub fittings at a 45-degree angle for DWV systems
- Product typeDrain Components
- Product colorWhite
- 45-degree hub elbow routes drainage around corners smoothly
- Schedule 40 PVC handles 140 °F continuous service reliably
- White finish matches standard DWV piping for clean look
- ASTM D1784 cell class 12454 certifies material quality
- Hub connection fits 3-inch pipe without threading needed
3-Inch PVC DWV 45° Hub Elbow
This Mueller Industries fitting redirects drainage flow at a forty-five-degree angle using a hub connection. The white Schedule 40 PVC body meets ASTM D1784 cell class 12454 for standard drain, waste and vent installations. It is supplied new and rated for a maximum temperature of one hundred forty degrees Fahrenheit.
Replaces Damaged Or Misaligned DWV Bends
Swap this elbow in when an existing hub fitting cracks, leaks or forces an awkward pipe run that stresses joints. The forty-five-degree sweep reduces turbulence compared with a ninety-degree turn, so the upgrade is worth it whenever smoother flow and less clog risk are priorities in a gravity-fed system.
Suits Residential And Light-Commercial Drain Lines
Plumbers and DIYers running three-inch PVC drain, waste or vent lines will find the hub connection familiar and the material code-compliant. Installers needing pressure-rated pipe, solvent-weld spigot ends, or fittings approved for temperatures above one hundred forty degrees should select a different product.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 92% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Mueller Industries |
| Model name | 1WKC5 |
| Product type | Drain Components |
| Product color | White |
Questions about this item
Will this 3-inch hub elbow fit Schedule 40 PVC pipe?
Yes, it is made for Schedule 40 pipe in a 3-inch size and uses a hub connection that slides over the pipe end.
What is the correct way to solvent-weld this PVC elbow?
Clean both surfaces, apply primer then cement to the pipe and inside the hub, push the pipe fully into the socket with a quarter turn, and hold until the joint sets.
When should this DWV elbow be replaced?
Replace it if you see cracks, warping, or leaks at the joint; the material is rated to 140 degrees F, so sustained hotter discharge can shorten its life.
More in Drain Stoppers, Strainers & Traps
Similar items
Cherne
Cherne 270237 3 in End-of-Pipe Plug with Wing Nut
- Drain Components
- HAWA
$5.99
0.0000729BTC
In stock
Nomaco Kflex
Nomaco Kflex 801-T-048238 Trap 2-3/8" x 59/64
- Drain Components
- Black
$5.99
0.0000729BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017026BTC
In stock