We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper tubing, 7/8 inch diameter, 60 foot length, soft temper

Mueller Industries, Inc.

Mueller Industries, Inc. 620F 7/8 in OD 60 ft L trap

SKU CH-CREA-K7GN8 MPN 620F

Copper coil tubing for potable water, 60 ft length with 7/8 in outside diameter and 0.045 in wall thickness

  • Product typeDrain Components
  • 60 ft coil reduces joints for faster installs
  • Type L copper wall rated 466 psi at 200 °F
  • Meets ASTM B88, NSF 372 and NSF 61 for potable water
  • Seamless C12200 copper resists corrosion and scaling
  • Soft temper allows hand bending without special tools

Copper L-Type Coil Tubing

This 60 ft coil of seamless copper tubing is made to ASTM B88 Type L dimensions for potable-water distribution. The soft temper allows hand bending without special tools, suiting residential and light-commercial plumbing installs.

7/8 in Outside Diameter

The tube measures 7/8 in OD with a 0.045 in wall, yielding a 0.785 in inside diameter and a 466 psi rating at 200 °F. That single pressure-class figure decides whether the coil meets the design pressure of the system you are piping.

Soft Temper Coil for Tight Runs

Supplied as a 60 ft coil, the tubing feeds through joists and around obstacles without joints, reducing leak paths and fitting count. It is certified to NSF/ANSI/CAN 61 and NSF 372 for drinking-water contact, and the C12200 alloy withstands continuous exposure up to 400 °F.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $368.99
Pricier than about 90% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameMueller Industries
Model name620F
Product typeDrain Components

Questions about this item

What does the 466 psi pressure rating mean when the tubing is installed in a hot water system?

The 466 psi rating applies at 200 degrees F; at the maximum operating temperature of 400 degrees F the allowable pressure will be lower, so design the system for the actual service temperature.

What do the NSF 372 and NSF/ANSI/CAN 61 standards guarantee for this copper coil?

NSF 372 certifies lead-free material for potable water, and NSF/ANSI/CAN 61 confirms the tubing meets health-effects requirements for drinking-water contact.

How much clearance is needed to uncoil and route the 60-foot length of 7/8-inch OD tubing?

The soft-temper coil ships in a 60-foot continuous length with a 7/8-inch outside diameter and 0.045-inch wall, so allow enough straight run and bend radius for the full coil to be laid out without kinking.

More in Drain Stoppers, Strainers & Traps

Similar items